FZR400?
Moderators: Site Director, FZR Forum Moderators
FZR400?
Was cruising some photography forums and saw this picture. FZR400?
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: FZR400?
im not sure but i doubt it. the exhaust is coming out the same side as th chain. our bikes arent like that. but the frame kinda looks fzr
-
Freestyle72
- Level 4.0
- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: FZR400?
Definately not a 1WG.
Re: FZR400?
I dont know any non twins that do that......
the fairings look YZF
the forks look gsxr
the wheels look marchesini
the fairings look YZF
the forks look gsxr
the wheels look marchesini
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: FZR400?
It is a Honda RVF 750 or 400 (RC45 or NC35). Probably the 400, but it is really tell by the size. The styling was very clsoe to the YZf600 / 750 Foxeye's.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: FZR400?
It's a Honda RVF400 (NC35)- No disrespect to my FZRs, but I kinda want one.
FZR400 (1WG): Purchased a perfectly good FZR400 with Yoshimura slip-on/EXUP, Yosh jet kit, Factory ignition advance, Racetech springs and emulators. It even had great bodywork. Like some diseased maniac I had to mess with everything good about that bike. Well, at least I have better brakes now.
FZR400RR (3TJ):Yeah, it's pink.
FZR400RR (3TJ):Yeah, it's pink.
Re: FZR400?
There is a company out in Cali that has been working on the development of the RVF400 engine for over a decade for their own racing efforts. They got it up to 90rwhp with a 50cc bore kit that is reliable. More than that and they keep grenadeing the engine. They are suppose to be working on a stronger crank and fuel injection that will hopefully pull it up to 105rwhp from a 450cc engine. But they are already spending 20k and engine without those mods.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: FZR400?
its sexy thats for sure
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: FZR400?
Yeah, I know a guy in my area (L.A.) with an RVF400 that has received some work with a Cosworth piston kit. He kept it fairly mild, but there are reports from a rider in the UK who has had problems with the wrist pins backing out of those pistons in a stroker motor. (It seems the circlips wore into the pistons to the point that they would no longer retain the wrist pin). There were some concerns that the same might happen to my friend's bike, but he is hoping for the best since he is running a stock stroke.cad600 wrote:There is a company out in Cali that has been working on the development of the RVF400 engine for over a decade for their own racing efforts. They got it up to 90rwhp with a 50cc bore kit that is reliable. More than that and they keep grenadeing the engine. They are suppose to be working on a stronger crank and fuel injection that will hopefully pull it up to 105rwhp from a 450cc engine. But they are already spending 20k and engine without those mods.
FZR400 (1WG): Purchased a perfectly good FZR400 with Yoshimura slip-on/EXUP, Yosh jet kit, Factory ignition advance, Racetech springs and emulators. It even had great bodywork. Like some diseased maniac I had to mess with everything good about that bike. Well, at least I have better brakes now.
FZR400RR (3TJ):Yeah, it's pink.
FZR400RR (3TJ):Yeah, it's pink.
