So over the weekend I got a few more things done. Bled the front and rear brakes now that the SS lines were on there, re routed the throttle cables because I routed them wrong and they were not snapping back. I also had to get some new bolts for my main pegs, so I got those installed as well. The battery I got did not fit upright, so I had to turn it on it's side and squeeze it into the battery box. It ended up fitting alright, albeit a little snug. I also hooked up my HID headlight. Wires up directly to the stock headlight plug with no issues, and is ridiculously bright, so it was exciting to get a good look at how that is going to be.
I also squared away my gauge cluster for the most part. Ended up plugging in a few things wrong but now it all lights up with the bike. Unfortunately the coolant temp sensor I have on the bike is wrong/bad so I will be replacing that soon with a stock one that Nate had, which I tested the resistance with and it checked out good. The only other thing is that the Tach doesn't seem to be picking up the RPM's. I have the ford coil pack, so I probably just have to go through the wiring and trace everything and make sure there are no busted connections anywhere. My chain still needs to be pressed but Nate has stumbled upon a DIY chain rivet tool that we will try. The guts of the bike are pretty much good to go, so the next photo updates will be of the fairing work and headlight mount fabricating.
Zero9243's Rebuild (New Pics 7/18/2011)
Moderators: Site Director, FZR Forum Moderators
Re: Zero9243's Rebuild (New Pics 5/29/2010)
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Zero9243's Rebuild (New Pics 5/29/2010)
nice!!!
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: Zero9243's Rebuild (New Pics 5/29/2010)
pictures yet?
1990 Yamaha FZR600 Genesis, Daily Driver
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
Re: Zero9243's Rebuild (New Pics 5/29/2010)
Unfortunately I can only get down to Nate's to work on the bike about once a week. It will probably be 1-2 weeks before any pics are uploaded of the fairing work.Genesis wrote:pictures yet?
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
-
Freestyle72
- Level 4.0
- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: Zero9243's Rebuild (New Pics 5/29/2010)
LOL... so I guess that was my hydralic master that went on your bike then? 
Re: Zero9243's Rebuild (New Pics 5/29/2010)
Oh yes and it works amazingly well. I had the cable on there first and you needed 2 hands to pull the clutch in. Works so well.Freestyle72 wrote:LOL... so I guess that was my hydralic master that went on your bike then?
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Zero9243's Rebuild (New Pics 5/29/2010)
Then this happened
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
-
chefen2006
- Level 3.5
- Posts: 390
- Joined: Mon Jun 09, 2008 1:51 am
- Location: Mijas Costa, Malaga, Spain.
Re: Zero9243's Rebuild (New Pics 7/21/2010)
JUHUUU Happy days...
Re: Zero9243's Rebuild (New Pics 7/21/2010)
Worked on the fairings a little bit this weekend. Got the headlight housing fiberglassed to the upper fairing and cutout to fit the HID. Fairings have been repaired where they needed to be and sanded. Looking forward to a paint job in the near future!
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Zero9243's Rebuild (New Pics 7/21/2010)
looking very good.
1990 Yamaha FZR600 Genesis, Daily Driver
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
Re: Zero9243's Rebuild (New Pics 7/21/2010)
BAM!
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Zero9243's Rebuild (New Pics 9/18/2010)
DIl. Jaw is hitting the floor right now. Back home?
-
thatkid
Re: Zero9243's Rebuild (New Pics 9/18/2010)
I don't like it the orange is orange, the black should be blacker, what are those valve dust caps? I can even see a stone on the front tyre. I don't even like the paddock stand. The mirrors look great tho same as mine. j/k
drooooooool,
gobsmacked that looks awesome.
drooooooool,
gobsmacked that looks awesome.
Re: Zero9243's Rebuild (New Pics 9/18/2010)
this shit is straight dope. thats all I can say, GREAT work. amazing looking bike. SEXY!!!!
1992 FZR 1000
:Under serious re-construction:
:Under serious re-construction:
Re: Zero9243's Rebuild (New Pics 9/18/2010)
Thanks for the comment guys! I'll be bringing it home from Nate's shortly! The end of a 2 year project! Feels so good.
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------