Im selling the streetfighter
Posted: Wed Nov 18, 2009 10:02 am
Some of this has been updated since I took these picture's 2 years ago.. I only had it out literally a hand full of times this year, and probably only did about 4,000 miles last year. My daughter that was born in July last year has taken up all my time. $2900 gets you the bike and everything FZR related that I have EXCEPT the GPR V4 steering dampener Contact me at jdoty53@yahoo.com
'89 FZR 600 frame
'04 YZF600 engine (installed in summer of 07 w/8K miles on it) add 5K to it as of 11/17/09
'04 YZF600 switchs, harness, ECU, carbs, exhaust
'04 R6 front and rear suspension, brakes, and wheels. (new wheel bearings in rear wheel and hub)
LSL billet top clamp W/risers
Tag T2 1 1/8" bars with bar adapters
'02 YZF600 gas tank frenched to hold Veypor dash unit
'02 R6 seat, tail plastic & Fiberglass solo cover
'04 SV clear tail light W/integrated signals
Aztec8 dual 4" head lights w/custom 43mm clamps and 8,000K HID's
'04 Kawi 636 Radiator (more than double the size for that motor) w/dual hard wired fans
GPR V4 steering damper w/custom top clamp mount and center stem from the tank...
Shark skinz from fender
True carbon fiber rear hugger
1 season on rear Vortex 50T 520 sprocket and Regina Gold 520 chain.
'05 Kawi 636 520 front sprocket (1 1/2 season's)
R1 1/4 turn twist throttle on it too.
Custom work??
---------------------------------------------------------
Crash cage w/5" billet sliders and 1" delrin pucks
Head light fork clamps
Billet Top bar clamp to hold GPR V4
Billet center damper mount from the tank
Frenched gas tank to hold Veypor unit
Fully adjustable billet aluminum rear sets (raw machined finish)
Undertail
SOME (not all) wiring (lighting, fans, etc)
All mounts and brackets to hold the YZF gas tank, R6 seat and tail.
Extra's???????
---------------------------------------------------------
WAY too much to remember...
Extra 52T 520 Vortex rear sprocket only 100 miles on it
2 spare FZR 600 parts engines still in tact (1 is blown)
1 spare FZR600 STOCK BORE top end (cylinders, piston's, rings, and rods)
1 spare FZR600 used 636 BIG BORE top end (cylinders, pistons, & rings)
1 FZR600 frame (no title, was gonna use for mock up frame)
FZR600 wire harness, ECU, switch's, etc
FULL FZR600 stock rear suspension (wheel, shock, swingarm, links, etc)
530 chain, 1 stock front FZR 600 sprocket, 2 spare 44&45T rear steel sprockets.. all with less than a season on them.)
relays
stator coils
side covers
bolts
I got way too much stuff to even keep track, I probably have alot more that I just cant remember... But its damn close to building a whole second bike.[/QUOTE]
'89 FZR 600 frame
'04 YZF600 engine (installed in summer of 07 w/8K miles on it) add 5K to it as of 11/17/09
'04 YZF600 switchs, harness, ECU, carbs, exhaust
'04 R6 front and rear suspension, brakes, and wheels. (new wheel bearings in rear wheel and hub)
LSL billet top clamp W/risers
Tag T2 1 1/8" bars with bar adapters
'02 YZF600 gas tank frenched to hold Veypor dash unit
'02 R6 seat, tail plastic & Fiberglass solo cover
'04 SV clear tail light W/integrated signals
Aztec8 dual 4" head lights w/custom 43mm clamps and 8,000K HID's
'04 Kawi 636 Radiator (more than double the size for that motor) w/dual hard wired fans
GPR V4 steering damper w/custom top clamp mount and center stem from the tank...
Shark skinz from fender
True carbon fiber rear hugger
1 season on rear Vortex 50T 520 sprocket and Regina Gold 520 chain.
'05 Kawi 636 520 front sprocket (1 1/2 season's)
R1 1/4 turn twist throttle on it too.
Custom work??
---------------------------------------------------------
Crash cage w/5" billet sliders and 1" delrin pucks
Head light fork clamps
Billet Top bar clamp to hold GPR V4
Billet center damper mount from the tank
Frenched gas tank to hold Veypor unit
Fully adjustable billet aluminum rear sets (raw machined finish)
Undertail
SOME (not all) wiring (lighting, fans, etc)
All mounts and brackets to hold the YZF gas tank, R6 seat and tail.
Extra's???????
---------------------------------------------------------
WAY too much to remember...
Extra 52T 520 Vortex rear sprocket only 100 miles on it
2 spare FZR 600 parts engines still in tact (1 is blown)
1 spare FZR600 STOCK BORE top end (cylinders, piston's, rings, and rods)
1 spare FZR600 used 636 BIG BORE top end (cylinders, pistons, & rings)
1 FZR600 frame (no title, was gonna use for mock up frame)
FZR600 wire harness, ECU, switch's, etc
FULL FZR600 stock rear suspension (wheel, shock, swingarm, links, etc)
530 chain, 1 stock front FZR 600 sprocket, 2 spare 44&45T rear steel sprockets.. all with less than a season on them.)
relays
stator coils
side covers
bolts
I got way too much stuff to even keep track, I probably have alot more that I just cant remember... But its damn close to building a whole second bike.[/QUOTE]
