Any topic relating to the FZR/YZF (UK) or motorcycling in general.
Moderators: Site Director , FZR Forum Moderators
dragracer1951
Site Newbie
Posts: 15 Joined: Wed Jul 23, 2008 9:38 am
Post
by dragracer1951 Wed Jul 23, 2008 9:44 am
Just got this link in my email...
I'm on about three or four FZR lists and have been for about 8 years. Some of you guys may know me, I have a 95 1040 and an 06 R1 50th edition. I own a cNC machine shop in Bremerton Wa and am into Drag racing...
Been into FZR's for a while and have built a ton of motors.
haunter
2000+ Posts
Posts: 2266 Joined: Fri May 09, 2008 9:17 amLocation: Urbana, Il USA
Contact:
Post
by haunter Wed Jul 23, 2008 9:57 am
oh noes not this guy!
Fizzinatorr
Level 6.5
Posts: 662 Joined: Fri May 30, 2008 5:05 pmLocation: Middle of NJ
Post
by Fizzinatorr Wed Jul 23, 2008 10:24 am
welcome
about time you found the site
sweekster
2000+ Posts
Posts: 2773 Joined: Tue May 13, 2008 10:52 amLocation: Perris, CA
Post
by sweekster Wed Jul 23, 2008 10:31 am
Welcome aboard. Good to have another engine person here.
the_finch
Level 8.5
Posts: 882 Joined: Tue Jun 03, 2008 8:06 pmLocation: Midland City, AL / UAHuntsville, Huntsville, AL
Post
by the_finch Wed Jul 23, 2008 11:51 am
Welcome to the forum!
1997 FZR600RJ K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch Stock header - Yoshimura RS-3 Carbon fiber slip-on Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear Stock rotors with EBC HH Sinstered pads
megaloxana
2000+ Posts
Posts: 2282 Joined: Thu May 15, 2008 5:05 pmLocation: Hanover, PA 17331
Contact:
Post
by megaloxana Wed Jul 23, 2008 11:57 am
Good to meet ya.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
ragedigital
4000+ Posts
Posts: 4153 Joined: Wed May 07, 2008 9:30 amLocation: Northwest St. Louis
Post
by ragedigital Wed Jul 23, 2008 4:31 pm
I knew someone would read the emails I send...
Thanks for joining and participating in the most "active" FZR Community on the internet!
95FZR600
2000+ Posts
Posts: 2972 Joined: Sat May 31, 2008 10:41 pmLocation: Kennesaw, Georgia
Post
by 95FZR600 Wed Jul 23, 2008 8:08 pm
No pics or nothing.....huh!! Welcome.
2002 Yamaha R6-----2003 Yamaha R6
ian
Level 2.5
Posts: 283 Joined: Mon May 19, 2008 1:36 pmLocation: Killeen, TX
Post
by ian Thu Jul 24, 2008 10:56 am
sweekster wrote: Welcome aboard. Good to have another engine person here.
haha +1
Thanks, for a country where nobody is allowed to mind his own business. Thanks, for a nation of finks.William Burroughs haha this is awesome... probably the only addiction support group i have seen that supports the addiction! Last words are for fools who haven't said enough.Karl Marx
yamaha_george
5000+ Posts
Posts: 5853 Joined: Fri May 09, 2008 8:46 amLocation: west london UK
Post
by yamaha_george Thu Jul 24, 2008 11:28 am
95FZR600 wrote: No pics or nothing.....huh!! Welcome.
Welcome to the Board glad we have another Gear head around and has his own machine shop +5K
dragracer1951
Site Newbie
Posts: 15 Joined: Wed Jul 23, 2008 9:38 am
Post
by dragracer1951 Mon Jul 28, 2008 7:02 pm
This is my 06 50th R1
This is my 95 1040. Makes 152rwhp on Mike Valasko's dyno. It's gone 9.84's at 144 and 1.277 short numbers
This is the Fuel Bike. It's a 1602 big block. I machined the cases and head from scratch
We've gone pretty deep into the 6's
tommyj27
Level 9.5
Posts: 970 Joined: Wed May 07, 2008 10:59 amLocation: Minneapolis, MN
Post
by tommyj27 Mon Jul 28, 2008 8:38 pm
Wow, those are some impressive numbers, and some sweet looking bikes.
YAM93
1000+ Posts
Posts: 1019 Joined: Sat May 17, 2008 8:19 pmLocation: Maryland, USA
Post
by YAM93 Mon Jul 28, 2008 9:32 pm
Damn, those bikes just get sicker as I scrolled down the page. Love 'em. WOW is an understatement. I like how you kept the stock look on the FZR1040.
Did you have to run NOS to get to 9.77 ? You must have totally rebuilt the engine. Again, awesome, and welcome to the forum.
" several meat-eaters lay in vomit, too weak to move..."
