axle block interchanging?

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
racing geek
Site Newbie
Posts: 5
Joined: Mon Jul 18, 2011 12:29 am
Location: Milwaukee, WI

axle block interchanging?

Post by racing geek »

I've been toying with the idea of using an fzr swingarm on my project bike and was wondering what parts from a 89-90 fzr600 swingarm would fit onto a 91-99 fzr600 swingarm. A complete list of parts would be best but I'm most interested in if the axle blocks from the older bikes will work in the swingarm from the newer bike.
User avatar
Nik
100+ Posts
100+ Posts
Posts: 128
Joined: Sat Jul 16, 2011 8:12 am
Location: Trinidad, West Indies

Re: axle block interchanging?

Post by Nik »

RG,
the wiki has a link to a micro-fiche where you can compare years. Y_G has a whole write up on swing arm swaps for his 600 '92 UK model

http://www.saltmine.org.uk/fzr/swingarm.html


http://www.saltmine.org.uk/fzr/3tj-mod.html

which may give you more ideas.
W.F O
Nik H.
There are two kinds of posts on Forums.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
Post Reply