Page 1 of 1

backfire

Posted: Wed Jul 02, 2008 3:30 pm
by pkhype
hi guys! Got a 94 fiz. Runs mint but backfires when letting off after high acceleration or high rpm. Also what should the tack be @ whin idling? Thanks so musch for your help!

Re: backfire

Posted: Wed Jul 02, 2008 4:22 pm
by Fizzinatorr
800-1500 for tach, usually 1100

sounds like your carbs to me, give me some more info, stock pipes, have a jet kit, pods or airbox? How do the plugs look

Re: backfire

Posted: Wed Jul 02, 2008 4:23 pm
by Dr Rockso
mine idles well at 1100 . dunno about the backfires tho , you might be running rich .

Re: backfire

Posted: Thu Jul 03, 2008 1:32 pm
by tommyj27
Dr Rockso wrote:mine idles well at 1100 . dunno about the backfires tho , you might be running rich .
back-firing usually indicates a lean condition I believe.

Re: backfire

Posted: Thu Jul 03, 2008 2:52 pm
by haunter
leak in the exhaust will cause a rush of air into it upon letting off the gas and make backfire-like noises

Re: backfire

Posted: Thu Jul 03, 2008 4:57 pm
by billy_awesome
combustion outside your cylinders......could be any of the problems above but your valves might be outta wack.

Re: backfire

Posted: Thu Jul 03, 2008 5:10 pm
by Dr Rockso
tommyj27 wrote:
Dr Rockso wrote:mine idles well at 1100 . dunno about the backfires tho , you might be running rich .
back-firing usually indicates a lean condition I believe.
my bad , i always get em reversed , i'm carbtarded

Re: backfire

Posted: Fri Jul 04, 2008 1:51 am
by YAM93
Before you go adjusting anything (especially since you just got it) make sure you run a full tank of gas thru there and fill up with a fresh 93 octane tank of gas, see if it still happens.

How many miles does it have ?

Welcome to the forum.

Re: backfire

Posted: Sun Jul 06, 2008 10:57 am
by pkhype
thanks everyone-- got er done! goin strong!

Re: backfire

Posted: Mon Jul 07, 2008 12:00 pm
by Fizzinatorr
Congratulations! ClapHands How'd you end up fixing it?
Please post it so others with the same problem can benefit :)

Re: backfire

Posted: Sat Aug 16, 2008 7:49 am
by pkhype
The problem was a leak in the one of the headers. IT WAS A HOLE. I patched it up with some JB WELD for now and Ill put a new system on in the Winter!!! Thanx everyone!