FZR U-Turn Radius

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

User avatar
Kaje
Site Newbie
Posts: 35
Joined: Sat May 08, 2010 2:13 pm

FZR U-Turn Radius

Post by Kaje »

I just got done taking the MSF course. I was able to do a figure 8 just within the limits on a little 250cc suzuki cruiser style bike. i got back out on the road with my fzr, and i dont know if the road is not as wide, or im more nervous considering the sand on the sides, but what is the u-turn radius on an FZR? also, are all bikes relatively the same? (noob question) RRBike
Image
User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: FZR U-Turn Radius

Post by delvryboy »

I'm headed out to the dmv tonight or tomorrow night to try it just for shits and giggles. I think its possible if you get a lot of counter weight on it. Maybe slide your ass off a little.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image
User avatar
Fizzinatorr
Level 6.5
Level 6.5
Posts: 662
Joined: Fri May 30, 2008 5:05 pm
Location: Middle of NJ

Re: FZR U-Turn Radius

Post by Fizzinatorr »

Thread Jack

WHAT HAPPENED TO YOUR FRONT FAIRING??? :hijack:
8 Bikes so far...more coming too...Image

Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: FZR U-Turn Radius

Post by delvryboy »

It has a '92 race fairing that was cut out to hold 2 3" Autozone driving lights. They sucked as HL's, I couldn't ride down a dark street.

I've always liked the duals over the single, so I've been picking up the parts on the super cheap for the last 8 months. I had to have HL's though, so the below is what you get.

I have a '98 front end ready to go on, but I'm going to fighter it now. Just got my seca II upper today.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image
User avatar
Kaje
Site Newbie
Posts: 35
Joined: Sat May 08, 2010 2:13 pm

Re: FZR U-Turn Radius

Post by Kaje »

im going to :hijack: your :hijack:

So basically, you have to be a more skilled rider... eh.. i guess i got some work to do... =]
Image
User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: FZR U-Turn Radius

Post by delvryboy »

Well, you took the MSF, so you learned the proper way to do it. Just go ahead and apply everything you did on that cruiser to your bike. Personally, I rode a cruiser for like 10 minutes and then switched to one of those 225cc dual sports. I was killin some corners on knobbies in a torrential down pour. :D
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image
User avatar
Kaje
Site Newbie
Posts: 35
Joined: Sat May 08, 2010 2:13 pm

Re: FZR U-Turn Radius

Post by Kaje »

stupid MSF course only had 1 dual sport, 1 Ninja, and the rest cruisers. i wanted the ninja, someone else got it. =[

But at least i showed the guy up. i got a 97%. highest in my class. Cruisin
Image
User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: FZR U-Turn Radius

Post by delvryboy »

Yeah, I just took it this weekend. I'm tempted to take it again just cause I had so much fun.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image
User avatar
Kaje
Site Newbie
Posts: 35
Joined: Sat May 08, 2010 2:13 pm

Re: FZR U-Turn Radius

Post by Kaje »

It's a bit to expensive for me to take it again.. but however, i would like to take the experienced riders course in a year or two. =]
Image
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: FZR U-Turn Radius

Post by ragedigital »

Go to a local Track Day and do some Novice classes. You can learn a lot and it's very safe.
Thanks for joining and participating in the most "active" FZR Community on the internet!
User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: FZR U-Turn Radius

Post by delvryboy »

Kaje wrote:It's a bit to expensive for me to take it again.. but however, i would like to take the experienced riders course in a year or two. =]
Got ya. It's free here.
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: FZR U-Turn Radius

Post by yamaha_george »

ragedigital wrote:Go to a local Track Day and do some Novice classes. You can learn a lot and it's very safe.
Track days for the novice (track day virgins courses) are the best thing going teach you how to "read" the corners and look where you are going .
Will make you more aware of your surroundings instead of watching yourself & the next 5 yards of road..

Braking technique and body balance will come from that over time but you at least will not have to "unlearn" bad habits like us old guys LoL.
User avatar
Kaje
Site Newbie
Posts: 35
Joined: Sat May 08, 2010 2:13 pm

Re: FZR U-Turn Radius

Post by Kaje »

They actually teach that at MSF, i dont look at the ground right in front now. but i live in the middle of nowhere... i would like to learn stuff for the track.. that would be awesome. but lucky me. i live in the middle of no where. god. i can't wait till i'm done with this god forsaken college so i can move somewhere warmer..

but, anyways, that doesnt have to do much with the FZR's U-Turn radius. besides the fact you have to look through the u-turn.
Image
thatkid

Re: FZR U-Turn Radius

Post by thatkid »

Kaje wrote: but, anyways, that doesnt have to do much with the FZR's U-Turn radius. besides the fact you have to look through the u-turn.

I'm guessing the experienced riders (who gave you advice) already know that fact.

U-Turn radius is determined by wheelbase, the angle of the front wheel, and rear wheel spin.

Do some experiments, and inform of the U-Turn radius. I for one don't really care.
User avatar
haro504
Level 7.5
Level 7.5
Posts: 768
Joined: Fri Aug 08, 2008 5:42 pm
Location: winchendon, ma

Re: FZR U-Turn Radius

Post by haro504 »

well i find my 89fzr600 has a much tighter turn radius than the 02gsxr750 i had that thing would barely do the circles and i had to actually turn the wheel all the way and balence myself to make the turns and at an idel in 1st the slowest was either 5 or 7 mph cant remember. but here your supposed to do the test in the dimentions of the width of a road. i took my test when it was snowing cause they wont cancel them here and if you dont go you pay for it anyway should have seen the looks i got
ones life is the way it is only because you allow it make it happen.
i poop my pants i poop my pants
Post Reply