Page 1 of 1
carb problem
Posted: Thu Mar 25, 2010 8:56 pm
by Soaringman
My carbs were very dirty, bike would not run without choke on.
So I took them out and cleaned them. Bike starts and runs very well now
it just wont rev above 3 grand without bogging out.
Please help
Re: carb problem
Posted: Thu Mar 25, 2010 9:39 pm
by newguy
Did you sync and adjust the float bowls? Also i think that the main jet runs the bike at 3000 so you might want to look into that. Maybe theyre not screwed in tight.
Re: carb problem
Posted: Thu Mar 25, 2010 10:06 pm
by Soaringman
No I did not sync or adjust the float bowls , mainly because I don't know how. I did clean the main jets.
Looks like I'll be taking them off again.
Thanks
Re: carb problem
Posted: Fri Mar 26, 2010 1:43 am
by sweekster
Is the exup valve connected to the servo? Bike won't do much if that's stuck closed.