Page 1 of 1
dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 3:02 pm
by 3LK1-FZR
has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 3:39 pm
by zero9243
Depends on what kind of modifications you have. Stage 1 is for stock engines and claim to give a performance increase, but you wont notice anything if all you change is the stock jets to the dyno jet stage 1
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 4:22 pm
by yamaha_george
3LK1-FZR wrote:has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
3,
If you are cracking open your carbs look at the emulsion tube FZR's are renowned for having poor quality ones and you should check to see if your have worn to an oval
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 4:28 pm
by zero9243
yamaha_george wrote:3LK1-FZR wrote:has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
3,
If you are cracking open your carbs look at the emulsion tube FZR's are renowned for having poor quality ones and you should check to see if your have worn to an oval
The worn emulsion tubes are usually noticed in poorer gas mileage
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 4:49 pm
by 3LK1-FZR
never heard about the emulsion tubes being bad. but is the kit worth the money? my only mods are a k&n box filter and a vance & hines slip on.
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 4:52 pm
by zero9243
3LK1-FZR wrote:never heard about the emulsion tubes being bad. but is the kit worth the money? my only mods are a k&n box filter and a vance & hines slip on.
if by box filter you mean one that drops right into the airbox a stage 2 might be what you want to try, Since the engine is now experiencing a little difference from stock.
Emulsion tubes are $100 for nikel plated ones that wont wear down. It depends on you if its worth the money.
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 5:02 pm
by 3LK1-FZR
yes i have the K&N that goes into the stock air box.
Re: dyno jet performance kit stage 1
Posted: Thu Jul 23, 2009 5:48 pm
by sweekster
It's pretty much drop in (jets and needles), synch/tune, and go play. I'm running Factory Pro Stage 1 jetting in my 94 1k also with a K&N and the airbox. They aren't much different with the exception of the how the jets are numbered and the design of the needles (check the wiki for more detail on the differences).
Re: dyno jet performance kit stage 1
Posted: Fri Jul 24, 2009 12:09 am
by 3LK1-FZR
i just looked at the factory stage 1 kit and i think i will order it tomarrow.