FZRSupport: the FZROnline Archive

Hi this being my first post, can you guys tell me, what fairings will fit a 97 FZR6? I heard that you can throw on YZF side lower fairings, or find some way to fab on r1 fairings. Thanks for the info.

I believe for a direct fit all years sides will fit and 89-90/93-on. 91/92 has a differnt single headlight upper. Other than that pretty much all the same. Alot of differnet ones can be made to fit, just depends on how much work you want to do.

you can put anything on with a little work...I got my fairings on

I have 2003 R1 fairings and headlight for sale

they were on my FZR which got sold

I have FZR side fairings and 99 r6 upper and tail.

This may sound like a dumb or obvious question....but I won't know unless I ask. So, along these same lines.... Can fairings from a FZR 1000 fit a 600?

diva wrote:This may sound like a dumb or obvious question....but I won't know unless I ask. So, along these same lines.... Can fairings from a FZR 1000 fit a 600?

not as a direct bolt on...

STN - what country are you from? That will help us identify what fairings will git your specific bike.

darrin

diva wrote:This may sound like a dumb or obvious question....but I won't know unless I ask. So, along these same lines.... Can fairings from a FZR 1000 fit a 600?

Ask freeze all about this. it does not work too well.

Try some R1/R6 Fairings.

im currently aquiring items for a complete build and im also looking to put on som 03 to 05 r6 or r1 fairings i almost have everything but the fairings how much ar you looking for fizzinator dun dun daaaaaaa!

PM'd

diva wrote:This may sound like a dumb or obvious question....but I won't know unless I ask. So, along these same lines.... Can fairings from a FZR 1000 fit a 600?

My bike had 1K fairings on it when I bought it. Looked like ass, fit like ass. The tank is too wide and hits the bars, te fairings have to be trimmed to clear the engine, the tail was held on with zip ties, no way to fasten the seat. There are much better options. It was a half assed install but even with a lot of work I dont think it would look great.

I know this is an old thread

But what about an fox eye fzr 1000 upper flaring [head lights] not the sides will that match up with the fzr 600