FZRSupport: the FZROnline Archive

hi guys, i just recently got my bike painted and i put all my pieces on this morning. i cranked the bike up and it fired up fine, almost home i stopped by a gas station. I went to fired it back up and it wouldnt... So im thining my battery is dead. I rolled it and popped the clutch and drove it home. I noticed as i was driving in the drive way that my headlights wasnt on while the bike was on, so i cehcked the bulbs and they are not blown, so i then hooked up my battery charger and charged it for about 20 min. Still no diff results, im stumped, i hope its not my vr.... Oh and btw i have a 1990fzr 600

Its possible its your battery. You can do a voltage check on it. If its good then its your VR.

i just took my battery out and some of the fluid levels are low, so ill fill it up with ssome water and charge it up i guess and see if that works

It is the start button. With the bike running, slightly press the button to see if the headlights come back on. It is a common problem.

so do i need to buy a whole newstarter assembly? or what

What he is saying is its in the right control where the button is.

yea i know, but do i just need to take it apart and see whats going on wit it or do i need to buy another one??, basically asking is it a fixable problem or do i just buy another one

bkc4ever wrote:yea i know, but do i just need to take it apart and see whats going on wit it or do i need to buy another one??, basically asking is it a fixable problem or do i just buy another one

Sometimes if the contacts are not touching you might be able to make them but I have always just bought a new one.

Ya, I've bought new as well. The other option is to change to the R6 control switch and throttle assembly.

cad600 wrote:Ya, I've bought new as well. The other option is to change to the R6 control switch and throttle assembly.

if i was to go the r6 route is it a fairly easy install?

ok update!, my switch has a bad connection, because i kind of played wit it a lil just now and it worked, so im just going to open the switch up and see whats going on...phew so relieved considering i just got her painted..