Page 1 of 1
05 r6 swinger
Posted: Mon Apr 20, 2009 1:12 am
by ghettomedic505
so I have read the wiki on the 99-02 r6 swinger and was wondering if any one had done an 03-05 swinger or if it would work. any info appreciated
Re: 05 r6 swinger
Posted: Mon Apr 20, 2009 1:55 am
by sweekster
From what I gather they are the same dimensions so the same rules as the 99-02 swinger apply. Might wanna PM BMiller since his 400 framed hybrid has one of those swingers on it.
Re: 05 r6 swinger
Posted: Mon Apr 20, 2009 2:09 am
by ghettomedic505
sweekster wrote:From what I gather they are the same dimensions so the same rules as the 99-02 swinger apply. Might wanna PM BMiller since his 400 framed hybrid has one of those swingers on it.
sweet thanks
Re: 05 r6 swinger
Posted: Mon Apr 20, 2009 6:27 am
by 95FZR600
Bmiller and I measured the pivot axle point on both the 03-05 and the 99-02 and they are the same give or take a mm or so. You should be able to do the same as i did on the frame of the 600 to get the 03-05 swinger to work. Good luck and post pics.
Re: 05 r6 swinger
Posted: Mon Apr 20, 2009 9:58 pm
by 95FZR600
pm sent to ya medic.