Page 1 of 1
95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Wed Feb 18, 2009 1:13 pm
by R3TARD
MSsilves said on the archives
http://www.fzrarchives.com/ipb/index.ph ... 850&st=225 that he had no problem sharing the information on the tach circuitry for the r6 gauge cluster mod but he never posted it. I need this information so i can do this mod. Mark could point me to what I need or can u look at yours and get me a decent close up pic of your unit so I can make one for myself. Thanks in advance
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Wed Feb 18, 2009 9:22 pm
by 95FZR600
1st of all, you will need R1 gauges for this setup to work. 98-03? The tach box I bought from him does not work on the R6. He is working on one for that particular speedo. Right now I have my wire run straight to the CDI. I dont have the time right now to do anything with that box. If you can give me a couple weeks it will be no problem, I can snap some pics.
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Thu Feb 19, 2009 8:24 pm
by 95FZR600
BMiller wrote:95FZR600 wrote:1st of all, you will need R1 gauges for this setup to work. 98-03? The tach box I bought from him does not work on the R6. He is working on one for that particular speedo. Right now I have my wire run straight to the CDI. I dont have the time right now to do anything with that box. If you can give me a couple weeks it will be no problem, I can snap some pics.
R1 is only '98-01.
ah yea..right on.
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Fri Feb 20, 2009 7:26 am
by yamaha_george
R3TARD wrote:MSsilves said on the archives
http://www.fzrarchives.com/ipb/index.ph ... 850&st=225 that he had no problem sharing the information on the tach circuitry for the r6 gauge cluster mod but he never posted it. I need this information so i can do this mod. Mark could point me to what I need or can u look at yours and get me a decent close up pic of your unit so I can make one for myself. Thanks in advance
R3tard,
seek and ye shall find.....
http://www.saltmine.org.uk/fzr/digitalclocks.html
I even have it so you can print out the cct diagram in LANDSCAPE mode on yer printer thingy
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Fri Feb 20, 2009 7:29 am
by 95FZR600
Thanks George! That saved me tons.
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Fri Feb 20, 2009 8:55 am
by R3TARD
thanks alot geo. U r the man
Re: 95FZR !!!!!!!!help r6 digital gauge tach convertor
Posted: Fri Feb 20, 2009 9:14 am
by yamaha_george
R3TARD wrote:thanks alot geo. U r the man
R3tard & Co.
If it is worthwhile tech I usually have it logged someplace I will add the link to the WIKI