Page 1 of 1
Banjo Bolt with bleed screw / nipple
Posted: Wed Feb 20, 2013 7:04 pm
by GreyImport
Came across these on another forum......seem like a great way to bleed the MC and the top end of the system.
Anyone used one?
http://www.ebay.com.au/itm/M10-x-1-00-b ... 257959b5c8
Re: Banjo Bolt with bleed screw / nipple
Posted: Wed Feb 20, 2013 7:23 pm
by SouthendChris
These are excellent for saving calipers where the bleed nipple has snapped/seized!
Never though of fitting them up at the m/cyl!
Chris
Re: Banjo Bolt with bleed screw / nipple
Posted: Wed Feb 20, 2013 11:07 pm
by DonTZ125
They are the cat's ass. Every bike I've worked on since I discovered the things has had them. It's even better when you add replace the bleeder screws on the M/C and calipers with 'speed bleeders'.
Re: Banjo Bolt with bleed screw / nipple
Posted: Thu Feb 21, 2013 11:25 am
by Stig
DonTZ125 wrote:It's even better when you add replace the bleeder screws on the M/C and calipers with 'speed bleeders'.
might be a language thing...but whats speed bleeders please
BTW, I have the bleed nipple on the MC. I fitted it when I installed the radial MC and gold spots
Re: Banjo Bolt with bleed screw / nipple
Posted: Thu Feb 21, 2013 6:04 pm
by GreyImport
Well I was going to ask what speed bleeders were also
Re: Banjo Bolt with bleed screw / nipple
Posted: Thu Feb 21, 2013 6:58 pm
by DonTZ125
Re: Banjo Bolt with bleed screw / nipple
Posted: Thu Feb 21, 2013 9:58 pm
by GreyImport
Hmmm...they look the ducks guts too
Don ,do u know what size/part number would fit the 3LN1....if any?
Re: Banjo Bolt with bleed screw / nipple
Posted: Thu Feb 21, 2013 11:03 pm
by DonTZ125
According to the chart on their website, Nissin calipers as fitted to just about everything prior to 2001, use the SB8125L.
Re: Banjo Bolt with bleed screw / nipple
Posted: Fri Feb 22, 2013 7:45 am
by Stig
nice idea...will spread the word on them beauties