Carb bowl gaskets and float needles...

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
noshoes
100+ Posts
100+ Posts
Posts: 112
Joined: Thu May 15, 2008 2:53 pm
Location: Mt Washington Valley N.H.

Carb bowl gaskets and float needles...

Post by noshoes »

I need 4 for my 90 1000..They have some on ebay but if any one knows were to get them in the US cheap please let me know..Thanks..
States visited on my 90 FZR 1000
ImageImage
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
User avatar
Stig
Level 3.5
Level 3.5
Posts: 398
Joined: Mon May 10, 2010 8:11 am
Location: Nottinghamshire UK
Contact:

Re: Carb bowl gaskets and float needles...

Post by Stig »

I can do toobs and needles and post to US for a couple of quid extra

They're genuine Mukuni items from an authorized supplier. I by in bulk every so often for the forum and this time bought an extra set as I always get asked for some after the group buy.

prices for FZR items to UK post mainland

needles - £37.20 to UK post
toobs - £54.00 to UK post
full set - £89.40 to UK post

let me know if you want some
If its not broken it dont need fixing

http://www.exup1000.co.uk
User avatar
noshoes
100+ Posts
100+ Posts
Posts: 112
Joined: Thu May 15, 2008 2:53 pm
Location: Mt Washington Valley N.H.

Re: Carb bowl gaskets and float needles...

Post by noshoes »

I got 4 needles for 34 delivered, tubes r good just looking for bowl gaskets 4..Thanks
States visited on my 90 FZR 1000
ImageImage
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
User avatar
noshoes
100+ Posts
100+ Posts
Posts: 112
Joined: Thu May 15, 2008 2:53 pm
Location: Mt Washington Valley N.H.

Re: Carb bowl gaskets and float needles...

Post by noshoes »

Got the gaskets off of Bike bandit for $7.49 each...See how long it takes to get them.........
States visited on my 90 FZR 1000
ImageImage
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
Post Reply