Debrix valve damper

JasonRDfan · Post by **JasonRDfan** » Thu May 02, 2013 3:59 pm

Who has bought the debrix valve damper? Supposedly it works as well as racetech's emulator. I think I will order one tomorrow. http://www.debrix.com/41mm-Fork-Damper- ... m?CartID=1

twack · Post by **twack** » Thu May 02, 2013 9:19 pm

dont we need 38mm not 41?

JasonRDfan · Post by **JasonRDfan** » Thu May 02, 2013 9:52 pm

From my understanding the inside damper rod is the same size. So this one should fit ours. I have found this information on the archives and a sv forum. This one also fits a gen one sv650 which has the same inside damper rod.

Post by **DonTZ125** » Thu May 02, 2013 10:28 pm

Yes, but if it doesn't fit inside the 38mm fork tubes, it doesn't matter what size the damper rod is ...

JasonRDfan · Post by **JasonRDfan** » Thu May 02, 2013 10:47 pm

I will try to find the posts at the Archives when they where talking about it. I believe they said it fit.

JasonRDfan · Post by **JasonRDfan** » Thu May 02, 2013 10:54 pm

Ok here is the link to the archives
http://www.fzrarchives.com/ipb/index.ph ... opic=54771

JasonRDfan · Post by **JasonRDfan** » Thu May 02, 2013 11:10 pm

I recognize a couple of names posting over there. I should have opened a topic discussing these first on this forum. I did not find anything here about these. Someone just posted about a group buy for the UK. Anyways it looks like a cheap alternative for gold valve cartridge emulators.

JasonRDfan · Post by **JasonRDfan** » Sat May 04, 2013 3:40 am

Anyone? Come on people!! I know someone bought these! Lol I need to know if you like the quality? Any problems?

Genesis · Post by **Genesis** » Sat May 04, 2013 5:16 pm

Hmmm. Not sure of that one mate.good luck

Sent from my C771 using Tapatalk 2

JasonRDfan · Post by **JasonRDfan** » Sat May 04, 2013 7:17 pm

People over at fzr archives have been using it, that's why I posted a link to their messages. I just wanted to know the quality of this brand? Seems like a sweet deal right?

JasonRDfan · Post by **JasonRDfan** » Mon May 06, 2013 12:56 am

Cool, so I just found this, sv650 gen 1 has the same size fork damper rod and internals as a fzr 600. I just sold my sv650 gen1 about a month ago. So I just found this write up on the sv page.
http://www.svrider.com/forum/showthread.php?t=167329

buzzawak · Post by **buzzawak** » Mon May 06, 2013 7:15 pm

I have recently installed the Debrix valve in my fzr400/600. Yes they fit our 38mm forks. What else would you like to know?

JasonRDfan · Post by **JasonRDfan** » Tue May 07, 2013 8:46 am

I just wanted to know if it was worth it or should I buy racetech's brand.

buzzawak · Post by **buzzawak** » Fri May 10, 2013 12:07 am

JasonRDfan wrote:I just wanted to know if it was worth it or should I buy racetech's brand.

The only difference between the two is you have a choice of 3 valve load springs when buying the racetech stuff.
I wouldn't be surprised it they both came from the same Chinese factory.
Makes a world of difference to how the forks work. I would also recommend getting some stiffer fork springs at the same time.
So much easier to do a whole rebuilt while the forks are apart.

Pair of 41mm Harley cartridge emulators inc postage $82.39
0.85kg/mm Sonic brand fork springs inc postage $119.00
Seals and Bushers inc postage inc postage $50
Snap rings $22
Fork oil $18.00
Total to me in Australia = $291.39

A bit of powder coating and new forks.

buzzawak · Post by **buzzawak** » Fri May 10, 2013 12:14 am

Figured I would get the rims powder at the same time.

FZRSupport: the FZROnline Archive

Debrix valve damper

Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper

Re: Debrix valve damper