axle block interchanging?
Moderators: Site Director, FZR Forum Moderators
-
- Site Newbie
- Posts: 5
- Joined: Mon Jul 18, 2011 12:29 am
- Location: Milwaukee, WI
axle block interchanging?
I've been toying with the idea of using an fzr swingarm on my project bike and was wondering what parts from a 89-90 fzr600 swingarm would fit onto a 91-99 fzr600 swingarm. A complete list of parts would be best but I'm most interested in if the axle blocks from the older bikes will work in the swingarm from the newer bike.
Re: axle block interchanging?
RG,
the wiki has a link to a micro-fiche where you can compare years. Y_G has a whole write up on swing arm swaps for his 600 '92 UK model
http://www.saltmine.org.uk/fzr/swingarm.html
http://www.saltmine.org.uk/fzr/3tj-mod.html
which may give you more ideas.
the wiki has a link to a micro-fiche where you can compare years. Y_G has a whole write up on swing arm swaps for his 600 '92 UK model
http://www.saltmine.org.uk/fzr/swingarm.html
http://www.saltmine.org.uk/fzr/3tj-mod.html
which may give you more ideas.
W.F O
Nik H.
There are two kinds of posts on Forums.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
Nik H.
There are two kinds of posts on Forums.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!