dyno jet performance kit stage 1
Moderators: Site Director, FZR Forum Moderators
dyno jet performance kit stage 1
has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
Re: dyno jet performance kit stage 1
Depends on what kind of modifications you have. Stage 1 is for stock engines and claim to give a performance increase, but you wont notice anything if all you change is the stock jets to the dyno jet stage 1
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: dyno jet performance kit stage 1
3LK1-FZR wrote:has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
3,
If you are cracking open your carbs look at the emulsion tube FZR's are renowned for having poor quality ones and you should check to see if your have worn to an oval
Re: dyno jet performance kit stage 1
The worn emulsion tubes are usually noticed in poorer gas mileageyamaha_george wrote:3LK1-FZR wrote:has any body here used one? any noticable results? im thinking about installing it on my FZR 1K but want a few opinions first.
3,
If you are cracking open your carbs look at the emulsion tube FZR's are renowned for having poor quality ones and you should check to see if your have worn to an oval
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: dyno jet performance kit stage 1
never heard about the emulsion tubes being bad. but is the kit worth the money? my only mods are a k&n box filter and a vance & hines slip on.
1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
Re: dyno jet performance kit stage 1
if by box filter you mean one that drops right into the airbox a stage 2 might be what you want to try, Since the engine is now experiencing a little difference from stock.3LK1-FZR wrote:never heard about the emulsion tubes being bad. but is the kit worth the money? my only mods are a k&n box filter and a vance & hines slip on.
Emulsion tubes are $100 for nikel plated ones that wont wear down. It depends on you if its worth the money.
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: dyno jet performance kit stage 1
yes i have the K&N that goes into the stock air box.
1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
Re: dyno jet performance kit stage 1
It's pretty much drop in (jets and needles), synch/tune, and go play. I'm running Factory Pro Stage 1 jetting in my 94 1k also with a K&N and the airbox. They aren't much different with the exception of the how the jets are numbered and the design of the needles (check the wiki for more detail on the differences).
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: dyno jet performance kit stage 1
i just looked at the factory stage 1 kit and i think i will order it tomarrow.
1989 FZR 1000 with an 01 R1 front end. k&n filters, vance & hines exhuast. currently down for a new face lift.
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation
i once raced a guy on a R1 with my RD 400. i beat him through the intersection, after that it wasnt a race...it was puplic humiliation