FZRSupport: the FZROnline Archive

I'm looking for any FZR600 aftermarket header in good shape. It doesn't matter if it's Vance & Hines, Muzzy, D&D, Yoshi, etc. as long as it's in good shape and the header ONLY. Let me know what you have and how much you want for it. Thank you!

mxryder21 wrote:I'm looking for any FZR600 aftermarket header in good shape. It doesn't matter if it's Vance & Hines, Muzzy, D&D, Yoshi, etc. as long as it's in good shape and the header ONLY. Let me know what you have and how much you want for it. Thank you!

M,
I would point you at DELVIK headers brand new at 134UKP I have a set and they are quality kit.

YG:

I was actually about to order a set this morning. They retail for $169.99 here in the states, Colorado to be exact. So, after entering in all of my credit card info the "final total" came to $330.00!!!! They are charging $150.00 to ship to California which is only two states over!!! WTF? Those guys need one of these and a few of these .

mxryder21 wrote:YG:

I was actually about to order a set this morning. They retail for $169.99 here in the states, Colorado to be exact. So, after entering in all of my credit card info the "final total" came to $330.00!!!! They are charging $150.00 to ship to California which is only two states over!!! WTF? Those guys need one of these and a few of these .

M,

I used Parcel2go.com cost less than 20 ukp see if they will do a collect for you

or

ASK one of the Colorado members to do a collect or local delivery for you

Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165

I've also seen this happen when the company has sales in the US and UK at the same time. Make sure you are looking at the US site when entering the shipping info.

I've got a set for you. PM sent.

Well, I sent Delkevic a message on their website and Luke responded with this:

I believe you found a flaw in our website. No way I would charge that much for shipping and I apologize that you had to go through the whole check out process to find that. I can ship a set to you for $35 shipping. You can pay via PayPal or over the phone with a credit card.
Thanks
Luke
Delkevic US
866.318.3065

I will definately be getting one of these headers one way or another. Thanks for all the responses fellas.

mxryder21 wrote:Well, I sent Delkevic a message on their website and Luke responded with this:

I believe you found a flaw in our website. No way I would charge that much for shipping and I apologize that you had to go through the whole check out process to find that. I can ship a set to you for $35 shipping. You can pay via PayPal or over the phone with a credit card.
Thanks
Luke
Delkevic US
866.318.3065

I will definately be getting one of these headers one way or another. Thanks for all the responses fellas.

M,
Nice one you will not be disappointed

ragedigital wrote:Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165

That's a whole lotta sexy right there. I wonder if that's a picture of the actual header? A 4/2/1 setup.

pefrey wrote:

ragedigital wrote:Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165

That's a whole lotta sexy right there. I wonder if that's a picture of the actual header? A 4/2/1 setup.

OH yeh, that is what arrived here and graces Y_G's machine < V B G >

Thanks to Todd I have a sweet set of those Delc's on my bike. That polished stainless looks awesome! Hey Y_G, how are yours holding up? Any rust or pitting?

mxryder21 wrote:Thanks to Todd I have a sweet set of those Delc's on my bike. That polished stainless looks awesome! Hey Y_G, how are yours holding up? Any rust or pitting?

Not so far mate but the Bike mostly sits at the moment while the Docs um & ahh over my spine problem