Page 1 of 1
Need 400 deltabox swingarm
Posted: Mon Sep 17, 2012 12:01 pm
by coondogsam
Hello all I am looking for a 400 deltabox swingarm.If you have one that you would sell please let me know
Re: Need 400 deltabox swingarm
Posted: Tue Sep 18, 2012 2:29 am
by yamaha_george
Hi,
are you aware there are 2 versions of this swing arm ?
take look at :-
http://www.saltmine.org.uk/kgb/catalogue.html
Re: Need 400 deltabox swingarm
Posted: Tue Sep 18, 2012 9:21 am
by coondogsam
No I guess I was unaware of that. Thanks for the information
Re: Need 400 deltabox swingarm
Posted: Tue Sep 18, 2012 10:38 am
by fzrbrandon
My guess is that, since he's in the U.S., he's looking for the 3EN2 swingarm which is found on the '90 model U.S. imported 1WG 400.
Re: Need 400 deltabox swingarm
Posted: Sun Oct 28, 2012 2:39 am
by willandrip
My guess is he wants the 3TJ one-single headlight !!! and I'm not 100% that 3en2 is identical.
3EN1 has bracing piece,3EN2 is first of True Deltabox but one year only then TJ series.
Your years are 12 months behind UK or Euro designations =3EN1is 88,3EN2 is 89 and so on.
This can be critical in one year only production models.
Anyone on here got a SP2 TK (race version) 1987 ????
All s/a ready available here in UK (I've a tea chest full but shipping prohibative or I'd give him one for nowt !!!!!)
Re: Need 400 deltabox swingarm
Posted: Wed Oct 31, 2012 1:17 pm
by fzrbrandon
willandrip wrote:My guess is he wants the 3TJ one-single headlight !!! and I'm not 100% that 3en2 is identical.
3EN1 has bracing piece,3EN2 is first of True Deltabox but one year only then TJ series.
Your years are 12 months behind UK or Euro designations =3EN1is 88,3EN2 is 89 and so on.
This can be critical in one year only production models.
Anyone on here got a SP2 TK (race version) 1987 ????
All s/a ready available here in UK (I've a tea chest full but shipping prohibative or I'd give him one for nowt !!!!!)
I still think the OP (who I'm guessing is long gone by now) is looking for the 3EN2 swinger. This is the swingarm that is found on U.S. imported 1990 1WG 400s and the one that most of the American guys are looking for. I'm aware of the differences between the 3TJ and 3EN2 units as I have both. They look very similar. However, the 3TJ is a bit beefier and is also wider to accommodate the 4.5" rear wheel. Also, the rear caliper mounting is different due to the 3TJ rear brake being underslung.
By the way, I haven't forgotten about the fuel pump. Just been REALLY busy lately. My apologies mate.