WTB: Any aftermarket header in good shape
Moderators: Site Director, FZR Forum Moderators
Forum rules
Sellers: Your "For Sale" ad may be pulled if you do NOT have your location in your profile. New members with less than 10 posts should give adequate information concerning themselves and why they are selling.
Members: Please use your best judgement when buying from others online, whether it be from someone here or Craigslist or eBay. Use a service to pay, like PayPal, never send cash, checks or other payment. If possible, refrain from giving out too much of your personal information. We do not limit new users from selling as we want our members to be able to get first dibs. It can be risky buying from anyone. Use common sense. If it doesn't feel right - don't do it. If possible, buy from a reputable member.
Please Note: Neither FZROnline.com, nor those financially responsible for the domain, nor any of the community members, will be held responsible for any transaction in anyway being it financially or otherwise.
While not required to sell your items, if you feel compelled to do so, you may make a donation to this site via PayPal to donation@fzronline.com, to help keep this forum active.
Sellers: Your "For Sale" ad may be pulled if you do NOT have your location in your profile. New members with less than 10 posts should give adequate information concerning themselves and why they are selling.
Members: Please use your best judgement when buying from others online, whether it be from someone here or Craigslist or eBay. Use a service to pay, like PayPal, never send cash, checks or other payment. If possible, refrain from giving out too much of your personal information. We do not limit new users from selling as we want our members to be able to get first dibs. It can be risky buying from anyone. Use common sense. If it doesn't feel right - don't do it. If possible, buy from a reputable member.
Please Note: Neither FZROnline.com, nor those financially responsible for the domain, nor any of the community members, will be held responsible for any transaction in anyway being it financially or otherwise.
While not required to sell your items, if you feel compelled to do so, you may make a donation to this site via PayPal to donation@fzronline.com, to help keep this forum active.
-
mxryder21
- Level 1.5
- Posts: 195
- Joined: Mon May 12, 2008 6:53 pm
- Location: Las Vegas, NV & Gilroy, CA
WTB: Any aftermarket header in good shape
I'm looking for any FZR600 aftermarket header in good shape. It doesn't matter if it's Vance & Hines, Muzzy, D&D, Yoshi, etc. as long as it's in good shape and the header ONLY. Let me know what you have and how much you want for it. Thank you!
1993 YZFZR61 ***UNDER CONSRUCTION***
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: WTB: Any aftermarket header in good shape
M,mxryder21 wrote:I'm looking for any FZR600 aftermarket header in good shape. It doesn't matter if it's Vance & Hines, Muzzy, D&D, Yoshi, etc. as long as it's in good shape and the header ONLY. Let me know what you have and how much you want for it. Thank you!
I would point you at DELVIK headers brand new at 134UKP I have a set and they are quality kit.
-
ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: WTB: Any aftermarket header in good shape
Thanks for joining and participating in the most "active" FZR Community on the internet!
-
mxryder21
- Level 1.5
- Posts: 195
- Joined: Mon May 12, 2008 6:53 pm
- Location: Las Vegas, NV & Gilroy, CA
Re: WTB: Any aftermarket header in good shape
YG:
I was actually about to order a set this morning. They retail for $169.99 here in the states, Colorado to be exact. So, after entering in all of my credit card info the "final total" came to $330.00!!!! They are charging $150.00 to ship to California which is only two states over!!! WTF? Those guys need one of these
and a few of these 
.
I was actually about to order a set this morning. They retail for $169.99 here in the states, Colorado to be exact. So, after entering in all of my credit card info the "final total" came to $330.00!!!! They are charging $150.00 to ship to California which is only two states over!!! WTF? Those guys need one of these
and a few of these .1993 YZFZR61 ***UNDER CONSRUCTION***
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: WTB: Any aftermarket header in good shape
M,mxryder21 wrote:YG:
I was actually about to order a set this morning. They retail for $169.99 here in the states, Colorado to be exact. So, after entering in all of my credit card info the "final total" came to $330.00!!!! They are charging $150.00 to ship to California which is only two states over!!! WTF? Those guys need one of these
I used Parcel2go.com cost less than 20 ukp see if they will do a collect for you
or
ASK one of the Colorado members to do a collect or local delivery for you
-
ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: WTB: Any aftermarket header in good shape
Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: WTB: Any aftermarket header in good shape
I've also seen this happen when the company has sales in the US and UK at the same time. Make sure you are looking at the US site when entering the shipping info.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: WTB: Any aftermarket header in good shape
I've got a set for you. PM sent.
FZR400 (1WG): Purchased a perfectly good FZR400 with Yoshimura slip-on/EXUP, Yosh jet kit, Factory ignition advance, Racetech springs and emulators. It even had great bodywork. Like some diseased maniac I had to mess with everything good about that bike. Well, at least I have better brakes now.
FZR400RR (3TJ):Yeah, it's pink.
FZR400RR (3TJ):Yeah, it's pink.
-
mxryder21
- Level 1.5
- Posts: 195
- Joined: Mon May 12, 2008 6:53 pm
- Location: Las Vegas, NV & Gilroy, CA
Re: WTB: Any aftermarket header in good shape
Well, I sent Delkevic a message on their website and Luke responded with this:
I believe you found a flaw in our website. No way I would charge that much for shipping and I apologize that you had to go through the whole check out process to find that. I can ship a set to you for $35 shipping. You can pay via PayPal or over the phone with a credit card.
Thanks
Luke
Delkevic US
866.318.3065
I will definately be getting one of these headers one way or another. Thanks for all the responses fellas.
I believe you found a flaw in our website. No way I would charge that much for shipping and I apologize that you had to go through the whole check out process to find that. I can ship a set to you for $35 shipping. You can pay via PayPal or over the phone with a credit card.
Thanks
Luke
Delkevic US
866.318.3065
I will definately be getting one of these headers one way or another. Thanks for all the responses fellas.
1993 YZFZR61 ***UNDER CONSRUCTION***
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: WTB: Any aftermarket header in good shape
mxryder21 wrote:Well, I sent Delkevic a message on their website and Luke responded with this:
I believe you found a flaw in our website. No way I would charge that much for shipping and I apologize that you had to go through the whole check out process to find that. I can ship a set to you for $35 shipping. You can pay via PayPal or over the phone with a credit card.
Thanks
Luke
Delkevic US
866.318.3065
I will definately be getting one of these headers one way or another. Thanks for all the responses fellas.
M,
Nice one you will not be disappointed
Re: WTB: Any aftermarket header in good shape
That's a whole lotta sexy right there. I wonder if that's a picture of the actual header? A 4/2/1 setup.ragedigital wrote:Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: WTB: Any aftermarket header in good shape
OH yeh, that is what arrived here and graces Y_G's machine < V B G >pefrey wrote:That's a whole lotta sexy right there. I wonder if that's a picture of the actual header? A 4/2/1 setup.ragedigital wrote:Order them from eBay for $30 shipping: http://cgi.ebay.com/ebaymotors/DELKEVIC ... 005wt_1165
-
mxryder21
- Level 1.5
- Posts: 195
- Joined: Mon May 12, 2008 6:53 pm
- Location: Las Vegas, NV & Gilroy, CA
Re: WTB: Any aftermarket header in good shape
Thanks to Todd I have a sweet set of those Delc's on my bike. That polished stainless looks awesome! Hey Y_G, how are yours holding up? Any rust or pitting?
1993 YZFZR61 ***UNDER CONSRUCTION***
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: WTB: Any aftermarket header in good shape
Not so far mate but the Bike mostly sits at the moment while the Docs um & ahh over my spine problemmxryder21 wrote:Thanks to Todd I have a sweet set of those Delc's on my bike. That polished stainless looks awesome! Hey Y_G, how are yours holding up? Any rust or pitting?