FZRSupport: the FZROnline Archive

looking to trade some parts I have laying around. im located in south dakota. I have:

all parts from an 89 fzr600. not perfect, no major cracks or anything, would be perfect to repaint.


these two pics are of the bottom fairing - part of the bolt hole is broken


side fairings sold for $80

subframe fairings

fairing bracket

rear tail assembly


headlights

pending at $35

gauge cluster, no cracks



carbs I rebuilt two years ago. I put in new gasket kits, the needles and the emulsion tubes. I synched them last august. I ran gas stabilizer through the bike, pulled the carbs off and drained the fuel.

factory pro needles

factory pro nickle plated emulsion tubes

carbs are sold, fp nickle plated emulsion tubes available

I have a box full of carb parts as well, if anyone needs any small parts

im looking for a very small headlight assembly for the street fighter look, parts for the r6 brake swap, parts for the hydraulic clutch swap, dirty/drag bars, aftermarket gauge, stator cover, bar end mirrors, random bits like that. I can add cash if I need to.

ill buy the front fairing and both side fairing pm me! 93455 is my zip code

oh with the faring brackets aswell and maby the tail fairings just in case , let me know

replied

i just got it, and i just seen what you meant about the headlight fairing being broken. so ill take both side farings and both tail side fairings. shoot me the price in my box.. if its resonable ill paypal it to you

PM sent about headlight fairing

replied to both. just so everyone else knows, I wasnt listing the front fairing because its damaged. the headlight stay bracket is bent on the right side where it actually bolts onto the bike. there is a piece missing by the windshield (where the fairing and windshield overlap slightly) and due to the right blinker being pushed in, there is damage on the right side. I suppose if you had enough time with a plastic welder it would be able to be repaired, but I simply didnt wanna sell junk. if anyone wants it, it's free with the headlight. as long as you pay shipping

edit: I noticed the coolant surge tank and voltage regulator are in the pics as well. if anyone wants em, pay shipping and they are yours

edit #2: $80 + shipping for side fairings and brackets. $30+ shipping for subframe side plastics. shipping isnt cheap!

Your bike looks sweet - How did you go about painting the engine/frame/etc....? Sent you message about the Carbs too - I got dibs if the price is good!

asianbandit wrote:Your bike looks sweet - How did you go about painting the engine/frame/etc....? Sent you message about the Carbs too - I got dibs if the price is good!

I dont like how the frame turned out, but its pretty simple. remove old paint, sand it a bit, seal prime paint. then I just used engine enamel on the engine after I cleaned all the old grit and dirt off. I never got a message about the carbs!

I got my bike for cheap - someone hit the plastics with spray paint while still on the bike so the frame is black in some places (dum-as). Don't mean to high-jack your thread....It looks good from the pics...Sent another message on the carbs...not sure what's going on...seem to be having issues getting messages out.

Thx

haha thanks. the single stage paint didnt hold up very well, so im gunna change it up a bit this season. no messages yet. you sure you're hitting the pm button and not the email button? make me an offer on the carbs

Ill take the front faring and headlight if you still have it. Zip code is 66535

do you still have the fairing brackets? how much for just those? 93455

sorry kaspen, gunna try to keep the brackets with the fairings for right now. ill let you know if I change my mind

headlight (and the free front fairing assembly) and carbs are pending. I returned the carbs to stock. I have the factory pro emulsion tubes for sale if anyone is interested, 1 full season of riding on them.

i'll let ya know here shortly Hinky. just incase, current price of the headlight is $35 plus shipping

Cool thanks. How much for the emulsion tubes.