http://www.streetfightersinc.com/FZR600 ... sories.htm
All kinds of modded parts and such.
FZR 400/600 FZR 1000....and streetfighter LINK
Moderators: Site Director, FZR Forum Moderators
- the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: FZR 400/600 FZR 1000....and streetfighter LINK
I talked with these guys about 6 months ago. Very helpful. Just don't get excited when you find the frame sliders on that site as they're for a YZF (European FZR). I already checked.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Re: FZR 400/600 FZR 1000....and streetfighter LINK
the_finch wrote:I talked with these guys about 6 months ago. Very helpful. Just don't get excited when you find the frame sliders on that site as they're for a YZF (European FZR). I already checked.
I saw that and to be honest I was excited until I zoomed in and saw the YZF fairing.
- the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: FZR 400/600 FZR 1000....and streetfighter LINK
They didn't have a picture up a couple of months ago when I called them. I had to get them to e-mail me a pic before I could tell that it wouldn't work. Lots of cool bodywork and lighting options there. I might build a FZR streetfighter next but I'm sticking with the stock-appearing bodywork on this fizz.95FZR600 wrote:the_finch wrote:I talked with these guys about 6 months ago. Very helpful. Just don't get excited when you find the frame sliders on that site as they're for a YZF (European FZR). I already checked.
I saw that and to be honest I was excited until I zoomed in and saw the YZF fairing.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
- megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: FZR 400/600 FZR 1000....and streetfighter LINK
Oh and bring your wallet....fat wallet.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP