Page 1 of 1
levers
Posted: Mon May 09, 2011 12:52 pm
by dunebuggyq
Does anyone know of any other models of bikes that the levers will fit a 90 fzr1k? i have been looking for some Shorty style levers but cant find any. Any info would be greatly appreciated.
Re: levers
Posted: Tue May 10, 2011 4:26 pm
by dougs
not sure of the bar dia you have but i had same problem with FZR600R so i got the lever mounts/master cyl from an 02 R6 and swapped the levers for shorties which are plentiful for the R6 and it all works a treat
Re: levers
Posted: Wed May 11, 2011 12:52 pm
by dunebuggyq
do they have a hydrolic clutch? cause thats where i am running into a problem
Re: levers
Posted: Wed May 11, 2011 4:14 pm
by dougs
nope manual, just have to check for one that does then, once you have the bar diameter then you should be able to fit any modern ones the same size
Re: levers
Posted: Thu May 12, 2011 11:10 am
by dunebuggyq
i would like to just replace the levers not the cylinder and all
Re: levers
Posted: Sun May 15, 2011 2:39 am
by Ice Queen
Flipper is on the exup1000 forum and l'm sure someone covered this question there. There are shorty levers out there to fit the 1000 exup
Re: levers
Posted: Sun May 15, 2011 6:21 pm
by yamaha_george
Hi,
I will ask my pal who has a1K what he is using for after market levers
Re: levers
Posted: Thu Jun 16, 2011 10:06 am
by dunebuggyq
bump , just wondering if anyone has any new info thanks
Re: levers
Posted: Sat Jun 18, 2011 5:25 pm
by yamaha_george
dunebuggyq wrote:bump , just wondering if anyone has any new info thanks
DBQ,
sorry been a bit off colour and not on top form. called my guy he cannot remember but it was either Demon Tweeks OR Mandp.com here in the UK he got his from. Both companies are on line & sell from the web too.
Re: levers
Posted: Sun Jun 19, 2011 5:27 pm
by dunebuggyq
thanks george
Re: levers
Posted: Sun Jun 19, 2011 5:37 pm
by yamaha_george
dunebuggyq wrote:thanks george
You are Welcome, sorry it took so long but then life happens