Page 1 of 1
NEED HELP with FR Brake Switch assembly
Posted: Sat Apr 23, 2011 10:36 pm
by basstracker
I have a 90 FZR 1000 EXUP, I recently disassembled my front brake lever and fluid reservoir and now cant figure out to reinstall the front brake switch lead! Just were it connects back to the lever! HELP
Re: OOOPPS NEED HELP
Posted: Sat Apr 23, 2011 10:40 pm
by kilika2
Are you talking about the switch that brings on the brake light?
Chris.
Re: OOOPPS NEED HELP
Posted: Sat Apr 23, 2011 10:42 pm
by basstracker
yes as of right now the brake light is stuck on
Re: OOOPPS NEED HELP
Posted: Sat Apr 23, 2011 10:53 pm
by kilika2
There's two wires on the 1k correct? I'm guessing you tried switching them? If yes then make sure it's not the rear brake that is stuck keeping the light on. Ask me how I know.
Chris.
Re: OOOPPS NEED HELP
Posted: Sat Apr 23, 2011 11:08 pm
by DonTZ125
It's not impossible for the front switch to be frozen - just far more LIKELY to be the rear. With the front leads disconnected, is the brake light on?
Re: OOOPPS NEED HELP
Posted: Sat Apr 23, 2011 11:23 pm
by basstracker
Sorry im not asking about any wiring just the internals on the switch, like the little spring and the metal rod! I know I sound like an IDIOT HAHA
Re: OOOPPS NEED HELP
Posted: Sun Apr 24, 2011 6:15 am
by yamaha_george
basstracker wrote:Sorry im not asking about any wiring just the internals on the switch, like the little spring and the metal rod! I know I sound like an IDIOT HAHA
BT,
no you do not we have all gone a step too far with something and landed in the "soup", I will repeat my wife's plea for a picture of the bits & I will print it and try and figure it out for you.