Page 1 of 1
fzr1000 genesis dynojeting
Posted: Thu Mar 31, 2011 11:30 am
by paul08050
hi im a new user i have a 87 fzr1000 with a remus exhaust single k&ns ive just dynojetted with 132 mains it runs crap with filters on splutters till you wind her open take filters off a lot better have i used the right jets didnt drill out the pilot air can anybody give any advice to run better thanks
Re: fzr1000 genesis dynojeting
Posted: Thu Mar 31, 2011 12:04 pm
by kilika2
In the wiki there is something about adding a piece of pvc to the pods to help out with a similar situation. I can't search the wiki on this device but just seach for pods.
Chris.
Re: fzr1000 genesis dynojeting
Posted: Thu Mar 31, 2011 1:03 pm
by paul08050
thanks worth considering cant seem to tune 3rd carb prop dont now weather to try the next jet down in the kit
Re: fzr1000 genesis dynojeting
Posted: Thu Mar 31, 2011 1:44 pm
by kilika2
Have you checked for air leaks on the Carb boots. It willbe a huge headache if there is one
Chris.
Re: fzr1000 genesis dynojeting
Posted: Fri Apr 01, 2011 12:58 pm
by paul08050
no i havent might be a stupid question but how do you know and check
Re: fzr1000 genesis dynojeting
Posted: Fri Apr 01, 2011 1:30 pm
by kilika2
Check visually for cracks and seperations and the like. But get yourself a can of starter fluid and while the bike is running spray some on the boot itself and if the rpms jump up a bit you have a leak. Also might be time to check the idle mixture screws. IMS. There is a pretty lengthy write up in the WIKI about that. It's pretty easy to do. Just need to source yourself an IR thermometer.
Chris.