FZRSupport: the FZROnline Archive

Posted: **Mon Jul 07, 2008 9:35 am**

Does anyone know what the stock jetting specs are for my Mikuni CV38MM carbs-downdraft?
Right now I have Dunojet stageIII Jet Kit Installed (bad idea, I know) and the slides were drilled. I am getting the bike back to stock to sell. With gas prices I need a daily driver and this one while it only has 7K miles is not the right fit for me anymore.
Thanks for the info.

Posted: **Mon Jul 07, 2008 9:38 am**

107.5 and 110 mains I beleive.

Posted: **Thu Jul 17, 2008 8:32 pm**

haunter wrote:107.5 and 110 mains I beleive.

Haunter are you still running the 140 142.5 jets?

Posted: **Thu Jul 17, 2008 10:12 pm**

nooooooooooooooope that was with pods on the 88.

i put the airbox back on with a K&N and ditched the DJ kit for a FP 1.0

ran the 110 and 112.5's on her then.

Posted: **Fri Jul 18, 2008 12:00 am**

LOL, you say that like it wasn't a good configuration. What were you getting for gas milage the old set up verses the new?

Posted: **Fri Jul 18, 2008 8:12 am**

it wasnt a good combo

I never got the pods working well above 7k

I dont recall the gas mileage as I sold it about a week after I got it running right

but it ran so much better everywhere

FZRSupport: the FZROnline Archive

88FZR 1000 stock jetting specs

88FZR 1000 stock jetting specs

Re: 88FZR 1000 stock jetting specs

Re: 88FZR 1000 stock jetting specs

Re: 88FZR 1000 stock jetting specs

Re: 88FZR 1000 stock jetting specs

Re: 88FZR 1000 stock jetting specs