FZRSupport: the FZROnline Archive

i got a guy who will trade me his front end for mine, even swap. his is a 90 1000 and i got an 88. will the front ends swap? i talking forks stems, the whole nine yards

I want to say the stems are different but not sure. 90 and 88 aren't much different. Both are conventional style like the fzr600. If you are looking for USDs you'll want 91 and newer.

i dont mind them being conventional, i can get them for free after all, i know the fork diameter increased to 43 mm. i wonder if ther is a place i can go with that kinda info. it aint in my manual. these forks are really nice compared to my set up, the even have rubber isolators for the clipons!

I'd trade up just because they're newer.. Aren't the convential style better for standerd road riding anyway?

im not sure anthony, but i have suddenly come to the realization that i can make this my track bike. its wrecked but ther frame is still straight,, thro those forks on and hit the track.

Have you looked into any fairing kits that airtech makes? I mean, its something, and if your gonna track it, ya can just do a nice rattle can job Edan. Did your brother basically give you the ZX6? if he's got the exup rear end I'd try and snag that from him... I'll have my exup rear end up once I bang this YZF swinger on

McFizzer wrote:...I'll have my exup rear end up once I bang this YZF swinger on

I'll take dibs on that rear end. As you may have seen it's been discovered that it's a bolt on swap for a 190 rear tire on the 600.