FZRSupport: the FZROnline Archive

Is there anything anyone prefers to use? I've put now about 5k on my baby since buying it in march and can hear a slight rattle, no biggie but I do want to adjust the servo 3 turns so it's slightly open and I do wanna grease it. Is there a certain High temp grease to use? I know my cables are in great shape as I had the tank off 2 days ago and was poking around being bored

CopperSlip anti-seize

DonTZ125 wrote:CopperSlip anti-seize

1K+ on that tip almost bullet proof where heat & lube are concerned.

Is there any certain place where this can be had at Don? I was in a Napa a few weeks ago looking at High temp grease as I knew the time was coming up to service it... and YG Im not sure I under stand 1k as in bike or 1k as in temp?

Well, I found mine in Canadian Tire - not sure if that's any help to you!

The guy at the counter should know what you're talking about when you ask for anti-seize.

They usually just call it "Anti-Seize Lubricant" or compound. Several companies like Loctite and Permatex make it. I use it on spark plug threads.

FWIW, it's "Copaslip", not "Copperslip".

McFizzer wrote:Is there any certain place where this can be had at Don? I was in a Napa a few weeks ago looking at High temp grease as I knew the time was coming up to service it... and YG Im not sure I under stand 1k as in bike or 1k as in temp?

No 1000 brownie points for the Tip of using copper Kote.

ah hah! now I getcha. Tomorrow shall pose as good day. Detailed her yesterday after riding in some down pouring weather grhhh. now to get it tip top

Apperciate the input guys. I tried searching but couldnt really find anything. i did however print out the write up on exup maintance which I thought was done great. the link was around her or on the archives or exupworldwide somewhere.... so many damn forums i get lost

McFizzer wrote:
the write up on exup maintance which I thought was done great. the link was around her or on the archives or exupworldwide somewhere.... so many damn forums i get lost

If we do not have it we WANT it so post it please.
thank You

I printed it out and its at home George. Currently out fixing my front fender. When I get home I'll look for the url on the page and post it for you unless i have it saved.

actually thats the think that Don posted. disregard my last post

Copaslip isn't as effective as this stuff. its not the cheapest stuff on the planet...but its worth it!

Stig can that be had in the US? and how much does it usually run?

McFizzer wrote:Stig can that be had in the US? and how much does it usually run?

Its made by Bostik an american company so try McMaster Carr