Page 1 of 1
FZR 1000
Posted: Tue Nov 10, 2009 1:26 am
by vlakvarkbeer
Hi there again , thanks for the info. Another problem how do u get gasolene in the engine oil is there a explanation for that. Thanks
Re: FZR 1000
Posted: Tue Nov 10, 2009 2:44 am
by sbutler
Carbs are overfilling float leval is wrong & leaking fuel into the engine..Common problem.
Re: FZR 1000
Posted: Tue Nov 10, 2009 7:16 am
by vlakvarkbeer
Can the float leval just set itself deu to wat pump presure .
Re: FZR 1000
Posted: Tue Nov 10, 2009 11:34 am
by yamaha_george
sbutler wrote:Carbs are overfilling float leval is wrong & leaking fuel into the engine..Common problem.
Check the float valve seat for wear on the valve rubber<?> seat tip
Re: FZR 1000
Posted: Tue Nov 10, 2009 1:09 pm
by chefen2006
eehhh if the float level is too high or the needle is leaking,exes fuel will run out of the carbs and splash out under the bike,some of it would pour into the engine. And also,the bike would misfire on the cylinder(s) that`s got the bad carb. Ask me how i know......
Re: FZR 1000
Posted: Tue Nov 17, 2009 12:50 am
by cecorri
Dont run the motor more than absolutely necessary and make sure you change the oil immediately after finding the problem !! Gasoline greatly reduces the lubricity of oil and you can kill a motor in just a few hundred miles with oil that has been contaminated by gasoline !!
CHANGE THAT OIL !!