FZRSupport: the FZROnline Archive

what should i do? I don't know what else to do to my FZR. i have my tail lights i have wider tires it has the muzzy exhaust k and n ait filter (which i should cleam...) I would love to get that light that goes above the headlights but i can't find that part yet. So let me know what else to do! i don't want to do any motor work because my dad did it all. and it runs just fine. So tell me what should i do?

the lil 3rd light can be found on UK ebay generally..............




I have HID's.....and they are amazing

man that sucks uk only! that sucks what about sliders? i never see sliders for it! i want a set you never know

Aftermarket suspension comes to mind.

You could upgrade your fork springs to Racetechs or Progressives and then swap out your rear shock for something newer. Steering dampner /stabilzer (Daytona). You could do frame sliders too but you'd probably have to cut your fairings. R1/R6 brakes with stainless steel braided lines. Nissin style (the little bottles) master cylinders for the front brake and clutch...etc

They pretty much nailed it except for SS brake lines.
I wouldn't worry about sliders, HID is good but make sure you go with Bixenon so you don't forfiet your HI/LO options. Everything else is going to be bespoke based on your imagination.

haunter wrote:the lil 3rd light can be found on UK ebay generally..............

I have HID's.....and they are amazing

Is that what that little square-ish port below the windscreen is?

And is there an HID kit that is a bolt-on for the FZR or do you have rig some other kit in?

tommyj27 wrote:

haunter wrote:the lil 3rd light can be found on UK ebay generally..............

I have HID's.....and they are amazing

Is that what that little square-ish port below the windscreen is?

And is there an HID kit that is a bolt-on for the FZR or do you have rig some other kit in?

you have to wire it in...........but from I can see of the wiring done to my bike it wasnt exactly hard. they are bixenon as I have hi and lo

and yeah that little port is for a small running light that went on bikes overseas.....


sliders...no real kit for our bikes, and you would def have to cut the fairings.

i already did the SS lines, my dad did the suspension already and its perfect. i have no idea what he put in there but its not stock as far as i know (i don't talk to my dad so i am not going to get that answer any time soon) I don't want to cut my fairings to put sliders in. So i guess my bike is done. i don't want to put HIDs on mine because i have seen to many headaches on hid kits on some bikes. And being that my bike is going on 20 years old i don't want to fire my wiring. So i guess my bike is done then and nothing else i am going to do to it i guess i need to start saving for a new bike! if anyone has that third light please let me know!!!

blackfzr1000 wrote:i already did the SS lines, my dad did the suspension already and its perfect. i have no idea what he put in there but its not stock as far as i know (i don't talk to my dad so i am not going to get that answer any time soon) I don't want to cut my fairings to put sliders in. So i guess my bike is done. i don't want to put HIDs on mine because i have seen to many headaches on hid kits on some bikes. And being that my bike is going on 20 years old i don't want to fire my wiring. So i guess my bike is done then and nothing else i am going to do to it i guess i need to start saving for a new bike! if anyone has that third light please let me know!!!

go ride it.

basket case CBxxx honda from the 70's or 80's


nice cheap project


plenty of ragged out ratty FZR600's around too

its outside right now at my job. i don't know i am always wrenching on something so i don't know what i want to do i can tell you this i want an 99 and up r1 for sure i think thats what i need to do!

if you go R1 go 04+

no reason to spend alot and not get FI!!

haunter wrote:if you go R1 go 04+

no reason to spend alot and not get FI!!

didn't think about it like that! good point for sure! i just want a new bike for some reason

blackfzr1000 wrote:what should i do? I don't know what else to do to my FZR. i have my tail lights i have wider tires it has the muzzy exhaust k and n ait filter (which i should cleam...) I would love to get that light that goes above the headlights but i can't find that part yet. So let me know what else to do! i don't want to do any motor work because my dad did it all. and it runs just fine. So tell me what should i do?

Let me know if you find a few of those lights, I've been periodically looking on ebay UK for them as well. I'll keep my eyes peeled for ya.