FZRSupport: the FZROnline Archive

Hi...I'm in the UK and proud owner of 1000 exup 15k ...white red and blue...and immaculate...apart from a few stone chips....

I'm hoping you guys can help.... I need to locate the colour codes for the pearl white, red and blue off the bike does anyone know where i can source either paint or touch up sticks for these....have searched high and low in the uk from model shops to paint factors with no joy...

Many thanks

Lukather wrote:Hi...I'm in the UK and proud owner of 1000 exup 15k ...white red and blue...and immaculate...apart from a few stone chips....

I'm hoping you guys can help.... I need to locate the colour codes for the pearl white, red and blue off the bike does anyone know where i can source either paint or touch up sticks for these....have searched high and low in the uk from model shops to paint factors with no joy...

Many thanks

L,
being in the UK myself I asked this very question for the '92 600 tri colour paint job

I was told Sikkens Paints Ltd (check google for addy ) do:-

Kawa400 ( pearl white) YAM9044 Red metallic as being close matches

REAL YAM-COLOURS:-
Silky white 00GE (that is zero zero G E)
apple red ARE 00H9 ( ARE zero zero H 9 )

no one could tell me the blue so far HTH

Hi that info is a godsend but the blue is the b$%tard i've been to a factors and they are not interested....even been to bnq to see if they can match it....


You wouldnt happen to know if a FZR600 hugger will fit on my FZR1000 exup?

Many thanks for all your help....I will keep on searching for the blue...


I contacted Yamaha and they have said all colours for my bike should be on a label on the base of the seat or on the side of the battery box !!! fooking hell its 21 years old....

thanks

yamaha_george wrote:

Lukather wrote:Hi...I'm in the UK and proud owner of 1000 exup 15k ...white red and blue...and immaculate...apart from a few stone chips....

I'm hoping you guys can help.... I need to locate the colour codes for the pearl white, red and blue off the bike does anyone know where i can source either paint or touch up sticks for these....have searched high and low in the uk from model shops to paint factors with no joy...

Many thanks

L,
being in the UK myself I asked this very question for the '92 600 tri colour paint job

I was told Sikkens Paints Ltd (check google for addy ) do:-

Kawa400 ( pearl white) YAM9044 Red metallic as being close matches

REAL YAM-COLOURS:-
Silky white 00GE (that is zero zero G E)
apple red ARE 00H9 ( ARE zero zero H 9 )

no one could tell me the blue so far HTH

You do remember the colours!!!!! Not bad for an old man
I'll try to find the blue George

Lukather wrote:Hi...I'm in the UK and proud owner of 1000 exup 15k ...white red and blue...and immaculate...apart from a few stone chips....

I'm hoping you guys can help.... I need to locate the colour codes for the pearl white, red and blue off the bike does anyone know where i can source either paint or touch up sticks for these....have searched high and low in the uk from model shops to paint factors with no joy...

Many thanks

May i have a photo of your fzr? It could really helped me to target the colour

hi thanks...hope these help... if anyone can tell me all the colour codes...that would be paul daniels .!!!!!

This can help me a lot!!! The red it's not the "apple red" though. It's another red. I 'll have the exact colour codes on monday afternoon.
By the way: awsome bike!!! I love fzr 1000's

That would be brilliant...

Many thanks....your bike is truly a piece of art ! awesome...

Lukather wrote:
You wouldnt happen to know if a FZR600 hugger will fit on my FZR1000 exup?
thanks

L,
The 6 does not have a hugger unless it has some other swinger and / or it is an after market job and the UK 'glass guys do not stock one at least about 2 years ago may have changed.

The 1K looks sound for sure, nice one

Hi thanks, do you know where I can get a Carbon Fibre Hugger for my FZR? looked everywhere most people dont stock or they dont have a chain guard...which is what I need ...

hugger chaingaurd built in....and not costing a fortune...

thanks

c

Lukather wrote:Hi thanks, do you know where I can get a Carbon Fibre Hugger for my FZR? looked everywhere most people dont stock or they dont have a chain guard...which is what I need ...

hugger chaingaurd built in....and not costing a fortune...

thanks

c

L,
As I said I never ever found a source for a 6 but the 1K should have try :-

ALKAMOTO_UK on Ebay.co.uk his name is Alan tell him Yamaha_george put you onto him. Very pleasant guy to deal with fone number was :- 07775-603320

two other Alans also into body parts:-
bodypanels4bikes 07884-061537

& 0129-460-5477

Had dealings with all of them in the past all seem relaible YMMV

Hey thanks...George, fantastic...info...just another quickie...do you know any companies that do restorations on the 1k...I may put the bike in and get it back to Concours if I can find someone at the right price?

thanks in advance...will call these guys

Lukather wrote:Hey thanks...George, fantastic...info...just another quickie...do you know any companies that do restorations on the 1k...I may put the bike in and get it back to Concours if I can find someone at the right price?

thanks in advance...will call these guys

L,
Sorry that is not my area by along way, I only own 1 bike in ex -factory nick out of 12 bikes all the rest have been modified in some way. Most of the "Restro" guys I know do it themselves (ie farm out work to painters etc but that is about it.

I would drop "Classic Bike " mag an email and see what they have to say, pictures @ 300dpi for scans or .jpg pictures to classic.bike@bauermedia.co.uk.

Best I can say really.
HTH
Y-G

Your Colours are:-
Silky White
Vivid Red Cocktail 1
Dynasty Blue (Decal Colour)
Pm me if you need codes

phill185 wrote:Your Colours are:-
Silky White
Vivid Red Cocktail 1
Dynasty Blue (Decal Colour)
Pm me if you need codes

P,
would be nice to have those codes to put in the WIKI