FZRSupport: the FZROnline Archive

Hi all can any one tell me are the fairing panels interchangeable from a genesis and a fzr 1000 as I need a white and red right hand side for my genesis

They are not. Also for when you are searching
87-88 FZR1000 is Genesis
1989–1990: FZR 1000 "Exup", major motor and chassis redesign, two round headlights
1991–1993: FZR 1000 "Exup", USD forks fitted, one rectangular headlight
1994–1995: FZR 1000 "Exup", Revised USD forks, up rated brakes, two "fox-eye" shaped headlights.

Which most mechanical things on the bikes are generally interchangeable very little of the body work is without major work.
What is wrong with the panel you have?

Perfect fairing is the only place that makes new fairings for the bike. http://www.perfect-fairings.com/en/prod ... irings_219
You may get lucky on ebay.

I don't have that side ,I bought the bike like this as a project

I see right and left in this picture?

Sorry it's the seat one I need,also are they fiberglass or plastic

Perfect fairings is fiberglass.

They are good but they are not finished you do have to do some sanding and cleaning up but its the only option.

If it comes down to it, i think my right side one is in okay condition. But it is blue. I switched to and R6 tail.

There are a couple on ebay but they are all blue or have been painted also.
http://www.ebay.com/itm/87-88-yamaha-fz ... Gk&vxp=mtr

Silverfox57 wrote:Sorry it's the seat one I need,also are they fiberglass or plastic

I have a spare RHD rear cowl....a bit tatty but original. I've actually got a LHD too but it has a piece missing and two RHD fairing panels and a LHD.

Hi thanks for your replys do you have any pictures

Its the one you see in my advitar right there.