Exup servo.
Moderators: Site Director, FZR Forum Moderators
Exup servo.
At what rpm should the servo start to move?
Re: Exup servo.
cant start mine yet to confirm as the headers are on the bench but from memory its around 3000 (ish)
Re: Exup servo.
Mine starts to move at 1500rpm and that's bang on cos its a digital rpm gauge. Suppose theres not much I can do about this?
Wonder why.
Wonder why.
-
Kevadlilleke
- 100+ Posts
- Posts: 113
- Joined: Mon Sep 03, 2012 3:38 pm
- Location: Estonia
Re: Exup servo.
According to the repair manual troubleshooting section, at 2000 rpm the EXUP should have started moving and if I recall correctly, at little under 6000 rpm it should be wide open already.
1990 FZR 1000, 1993 engine, terrible state... but improving.
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
2013 
2014 
[Project thread] The Yellow FZR - 1990/1993 FZR1000
2012
2013 2014