few carb questions!!!
Posted: Thu Feb 06, 2014 7:22 am
PostPosted: Thu Feb 06, 2014 10:09 am Post subject: few questions about carbs Reply with quote
Hi all
I know your probably sick to death of carb threads but have searched and searched and cant really find the answer im after
so, i have a 92 1000 exup ru, bike was running rough when i bought it, would idle like crap, clear after 3k, start with no choke whatever the weather so replaced the tubes.
when i stripped and cleaned the carbs it appears to have dynojet needles and 132 main jets. the float height seemed a little high too. put it all back together.
bike still starts and runs rough think the float heights were around 18mm and have since found that they should be 14mm
ive tried syncing with a manometer but is nea impossible to get the levels anywhere near where they need to be.
any one have any ideas if the float height should change with bigger jets?
thanks in advance
Hi all
I know your probably sick to death of carb threads but have searched and searched and cant really find the answer im after
so, i have a 92 1000 exup ru, bike was running rough when i bought it, would idle like crap, clear after 3k, start with no choke whatever the weather so replaced the tubes.
when i stripped and cleaned the carbs it appears to have dynojet needles and 132 main jets. the float height seemed a little high too. put it all back together.
bike still starts and runs rough think the float heights were around 18mm and have since found that they should be 14mm
ive tried syncing with a manometer but is nea impossible to get the levels anywhere near where they need to be.
any one have any ideas if the float height should change with bigger jets?
thanks in advance