Rear shock and swingarm bearings?

[Kevadlilleke]

1) Where would I get replacement bearings from?
2) Are there some reasonable product codes/measurements if I wanted to buy from a generic bearing manufacturer?

From the parts catalogue:

Code: Select all

BEARING, CYLINDRICAL    93317-52865-00    2pc
BEARING                 93317-41761-00    4pc
BEARING                 93317-42060-00    1pc
BEARING                 93399-99919-00    1pc

[Clanky]

The Yamaha 'special bearing' used on a lot of bikes (93399-99919-00) can be very expensive:

The cheapest source I found for an original part is here: http://www.boats.net/parts/detail/yamah ... 19-00.html

Another source for a non original part is here: http://www.splatshop.co.uk/shock-bearin ... e12pw.html

Here's a link to another forum for FZR1000 owners that may help: http://www.exup1000.co.uk/phpBB2/index. ... 54f1e1a046

Can't help you with the other bearing sizes because I don't have a 1000 myself.

[Sparky 61]

What bearings are you looking for? just swingarm bearings or the suspension linkage bearings? I found that just surfing the net and mailing bearing manufacturers with the internal/external bearing sizes and the bearing make up did the trick. I found a really good one here in the UK.

[Stig]

Banner over at my place has just done 90% of the rear suspension bearings with aftermarket items and saved a packet

http://www.exup1000.co.uk/phpBB2/viewto ... &start=180

[Sparky 61]

I know, if you look at the close ups of the swingarm I have installed grease nipples to this as well.