FZ750 Head on FZR1000 Geni
Posted: Wed Oct 24, 2012 6:52 am
Hi guys,
this is my first post. I have picked up a fzr1000 geni in bits, i also have a low milage complete FZ750 2mg head thats been shimmed etc. I think i have read they are inter changerble? Obviously the ports will be slightly smaller on the fz but i'm led to believe this increases low end end power but as a trade off the top end is reduced.
Can anyone confirm they are interchangable? do i use the 750 or 1000 cams....or is all this urban myth and i need to source a good 1000 head
I hope someone can help
cheers
this is my first post. I have picked up a fzr1000 geni in bits, i also have a low milage complete FZ750 2mg head thats been shimmed etc. I think i have read they are inter changerble? Obviously the ports will be slightly smaller on the fz but i'm led to believe this increases low end end power but as a trade off the top end is reduced.
Can anyone confirm they are interchangable? do i use the 750 or 1000 cams....or is all this urban myth and i need to source a good 1000 head
I hope someone can help
cheers