Genesis project (Finished)

[Schmo9]

This is the RHD panel...i need the the LHD side??

[kolederacer]

Let me take a look. it should be there.

[kolederacer]

This is?

[Schmo9]

Yeah that's it but I see the bottom is broken off the same as mine.... thanks for looking anyway kolederacer, I appreciate your help.

[Schmo9]

Discs have arrived from breakers in florida. No wear or corrosion but did need a coat of paint...came up well with caliper paint from VHT...

[kolederacer]

Looks nice! i have always liked the stock rotors they look nice.
Are you going with the stock caliper?

-Kole

[Schmo9]

Looks nice! i have always liked the stock rotors they look nice.
Are you going with the stock caliper?

-Kole

Yeah...whole bike will be standard apart from brake/clutch hoses which will be braided. I have the calipers stripped and in the powder coaters right now, picking them up tomorrow.... went for Subaru wheel gold, almost a perfect match for original finish..

[Schmo9]

Just got calipers back and they look amazing...

[Schmo9]

Well here's the front wheel, discs and calipers fitted...lookin pretty good me thinks..

[Schmo9]

Finally onto its own two feet....New chain and sprockets too..

[Schmo9]

Finished the fuel tap, fuel lines and clutch master cylinder. Got the bike started today and balanced the carbs. Only problem was 3 and 4 HT leads shorting to head when warm....New leads and caps ordered..

[djalbin]

Thanks for posting the updates. Bike is coming along nicely. It's going to be better than new when you're done with it.
.

[Jordan_Ciaramitaro]

I'm going to try pulling them up on the computer at home, pictures are not working on my phone.


Sent from my iPhone using Tapatalk

[kolederacer]

Hey i found this if you are still looking for the left hand side one. It appears to be complete.
http://www.ebay.com/itm/87-YAMAHA-FZR10 ... SweW5Vd38m

[Schmo9]

Yeah I saw that... $50 to ship to UK though..
I appreciate you keeping a look out