Head Removal, Bolts seized

[Lastmile]

I just used a short Allen socket with an extension, but I'm going to have to find one made for impact.

[Sparky 61]

Problem we have Stig is trying to get access to it as it is under the can bearing face, I know what your saying but the bolts are still siezed they are not snapped due to overtwisting while removing and the application of heat to the bearing runs with the difference in the metal compounds might well cause damage to the cam bearing faces, which is something else we dont want here.

Nice shout though

[Sparky 61]

Just in case I am well wrong Stig, which is very very possible, I am going to ask a local company who does this to see if they can do it for me, after all I can only ask, I will keep you updated. Cheers

[sk8r979dp]

i have been going through the same troubles haha i had to heat the ends of every single one with a torch before i got mine removed... this was yesterday in the process of coming back together right now

[coops]

So approximately how long hex impact driver do I need with cams removed?
Im glad I read this thread as im about to attempt head removal soon. Engine still in.