Holding Revs

[bad.mcc]

Hi Chaps,

FZR 1000 1992 8,948 miles( yes it's mint).

I have a problem with a perfect running bike, full power

I have balanced the carbs, adjusted the throttle cables to slacken them off, adjusted the EXUP cables.

I thought the sevo was a bit slow? but when i shut the throttle off the revs hold for a second or so, then slowly drop off to a steady tickover!

Help Please

[willandrip]

Weak mixture= cracked inlet rubbers , poor fitting airbox rubbers or incorrect mixture settings.

[desmarat]

Worth looking at the grip as well. Does it move freely, or a little hard. Might need some Lu e between the grip and tube. Always worth checking the small stuff first.

[bad.mcc]

cheers that gives me some areas to look at.

[bad.mcc]

Well thanks alot for the info:

The pilot screws were 2 turns out, adjusted them to 3 and she is running as sweet as a nut