Bitzforbikes

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
Rooster
100+ Posts
100+ Posts
Posts: 137
Joined: Wed Aug 15, 2012 9:18 pm
Location: Canada, Alberta, Central

Bitzforbikes

Post by Rooster »

So I am wondering if any of you folks out there in FZR land have ever bought anything from the aforementioned company, I found they had an engine gasket set on e-bay and I have tried to get them to reply to me with a photo of the actual kit cause its not the one pictured, no dice. Being optimistic I ordered one anyway because the price seems right. Anyone dealt with them or heard of they're track record.

They are at some place called, Blue Pit mill off Queensway, Rochdale, Lancashire,UK, according to they're address info.
Hope someone can confirm they are the bomb
Even a blind monkey gets the odd banana
User avatar
GreyImport
Level 2.0
Level 2.0
Posts: 233
Joined: Fri Jun 22, 2012 3:07 am
Location: Sunny Australia

Re: Bitzforbikes

Post by GreyImport »

I have only bought something very minor from them (rubber bleed nipple covers) but they were fine to deal with.
Seem to have a pretty good rap on ebay and have a big turnover.
1990 FZR250R 3LN1
1977 Triumph Bonneville 750 T140V
Image

Image
http://2fiftycc.com/index.php
EMAIL: greyimport@2fiftycc.com

LiteTek Carburettor Seal Kits
http://www.litetek.co/index.html
User avatar
Rooster
100+ Posts
100+ Posts
Posts: 137
Joined: Wed Aug 15, 2012 9:18 pm
Location: Canada, Alberta, Central

Re: Bitzforbikes

Post by Rooster »

Well they seem really helpful as they have sent me the photo's that I requested and all the seals and gaskets plus a few more I didn't expect to see are in the kit so I should be well set up for re-assembly now.
Even a blind monkey gets the odd banana
Post Reply