i have a ??? about the rear of bike

Moderators: Site Director, FZR Forum Moderators

Post Reply
chrisfzr1000
Site Newbie
Posts: 29
Joined: Fri Feb 06, 2009 4:22 pm

i have a ??? about the rear of bike

Post by chrisfzr1000 »

i have a 1990 fzr 1000 i tightened up the chain last week and now wheni come to a stop there is a grinding noise from the rear but not all the time brakes are all good pads a good..any ideas... also does anyone no about the 1990 fzr 600 i guy wants to trade me his 600 for the 1000 he also said top speed on the 600 was about 130mph is the true is the 600 a good bike.. :banana:
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: i have a ??? about the rear of bike

Post by sweekster »

Hmmm...is the 1000 too much for you? The 600 is 85hp..the 1000 is 145hp and much better to ride on windy days. The 600 does, however, weigh a lot less and it handles really well. I had a 92 600 for a couple years before getting my 1000. I've had that 600 up to 130 and that was with stock gearing. I'm still working on my 1000 so I can't verify the top speed but I read it was around 165 with the stock gearing. As as far the grinding you may want recheck your chain make sure it's not too tight and the rear wheel isn't crooked.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
User avatar
R3TARD
Level 4.5
Level 4.5
Posts: 491
Joined: Thu May 22, 2008 7:07 pm
Location: north Georgia
Contact:

Re: i have a ??? about the rear of bike

Post by R3TARD »

rear wheel is crooked most likely (been there done that) could be worn sprocket though. (new chain on worn sprocket = no good) if you can pull the chain away from the rear sprocket it may be worn

1992 FZR 600
Yoshi exhaust
K&N pods
Airtech R1-kit
02 R6 fork swap
02 R6 Swingarm
520 chain conversion
07 R6 controls
Vortex R6 clipons
07 R6 radial master


2003 CBR 600rr
bone stock
Post Reply