FZRSupport: the FZROnline Archive

I just put a new clutch in but I'm not getting the pressure in my leaver.
The clutch is movie ( cover is still off) but not as much as I'd like.
Any ideas?

I'm ordering some parts and just wanted to make sure.
The 87 and the 88 have the same engine right?
Thanks

Ya I took my clutch apArt and the basket was in pieces.
So hopefully that will be the fix

Wanted 87 fzr clutch basket and any other clutch parts you may have.
Thanks

I was on this forum a couple of years ago When I had an 89. Traded that for a dual sport. I recently bought an 87 for $800, came In pieces Also came with a decal kit. An a ton of reciets, It's been taken care of and runs very well. So after painting and bondo etc all the fairings I thought I should ...

No I did not sync or adjust the float bowls , mainly because I don't know how. I did clean the main jets.
Looks like I'll be taking them off again.

Thanks

My carbs were very dirty, bike would not run without choke on.
So I took them out and cleaned them. Bike starts and runs very well now
it just wont rev above 3 grand without bogging out.

Please help

Ya thats what i kinda thought.
would the rear show similar wear pattern?

Any ideas why my front tire is worn more on one side than the other.
only hade the bike one season and it came that way.

Thanks

The 1000 has to turn over fast to start.
Its a big engine and a small battery.
Mine does the same thing if the battery isnt full.

Try jumping it from car

Ok, I got power at the fuse but no power at the bulb.
I'm thinking busted wire.....?

So I opened the carb adjasent to the missing cylinder and behold a jet lying in the float bowl.
A jet had worked itself loose and fallen out. put it back in , So now she's running like a charm .

Thanks for everybodies help.

Now to figure out why those head lights don't work

Thanks guys, I kinda figured two coils, two cylinders each. I did a have a stuck float on a couple of occasions, gas pouring out. I thought maybe it was stuck closed this time so no gas traveling threw it at all. So I cleaned that float. Wasent the one in front of the missing cylinder but I will cle...

OK, so I took the fairings off, moved the radiator out of the way. Took all the leads off the plugs, tried testing them with mixed results, so I replaced all the plugs. But Number one cylinder is not firing (runs the same with lead disconnected). So, took the tank off and I see the plugs go into two...

Thanks for the for the info Sweeekster.

And thanks forthe welcome 95FZR600.