FZRSupport: the FZROnline Archive

They are the K&L brand, part number 18-5229 or CAB-Y15. There are four kits in packaging, one for each carb. I will try to figure out how to post pictures.

Steve

I have the rebuild kits for all four carbs, new in packaging. I purchased them but never got around to the carbs, and I just sold my FZR. It has the gaskets and the float jet. I was hoping to get at least $50 for the set. Steve http://fzronline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_item...

I have a set of four Factory Pro emulsion tubes/needle jets that I have never used, and I just sold my FZR. I never took them out of the plastic bag (it's still stapled). I was hoping to get around $100 for them, but since I obviously don't need them I'm willing to negotiate if you're interested. Th...

Hi All, I have a US 1995 FZR 600 with 6400 showing on the odometer. It starts, idles, and revs good. The issue is that at partial throttle between idle and roughly 2500 rpm it stumbles/feels flat, which makes it tricky to turn left or right from a stop. Above that rpm range it has normal power (powe...

I used my finger and wiped engine oil on the inside of the boot, then wiggled the carb assembly into the boots.

The Haynes manual calls it the relay arm. It's the part which the shock & dog bones (tie rods according to Haynes) attaches to.

I have a 95 FZR 600. I have the swingarm off and I noticed that the relay arm has about 1 mm of side to side movement where it attaches to the frame. Is that normal?

It was the main fuse. Thanks.

I forgot to mention that the fuses in the box were good. I'll check the 30 amp this evening. Thanks.

Is there a main fuse on the FZR600? I was trying to rewire the horn and must have shorted something out as I have no power going to anywhere with the key switched to on. The battery is fully charged. Everything worked fine 'til I screwed with the horn wiring (except for the horn of course). Any sugg...

I didn't remove it - a previous owner did. I recently obtained another sprocket cover and noticed it in that one. I didn't notice any problems riding without it.

The motor mount damper in the sprocket cover - is there any benefit to using it?