FZRSupport: the FZROnline Archive

It was the rectifier, got a new updated one and it works great, it wasn't hard to modify either, no cutting just had to drill another hole for the rectifier. It looks good where its at. Thanks for all the replys and help.

It felt like it was being robbed of power, so I am thinking since it has been running rich, it might be fouled plugs, I haven't ran the bike very hard until a couple of days when I finally was able to take it out on the high way and open it up for a couple of miles. The bike had been sitting for a c...

My FZR 600 was running fine going down the highway, I then got off the ramp to go home, it would take half throttle but would not take a hand full. Is this a carb issue or is it the plugs fouled? :

will this rectifier fit an 93 FZR600 with doing the modifications?

mossy- for future parts try www.cyclepartswarehouse.com I got alot of parts from them.

its a 92 chasis but the engine came from a 93?

yes whats it supposed to be reading at idle and at throttle? Thanks!

Can anyone help I have charged the battery full and rode with a friend and it killed the battery, It acts like its not keeping the battery charged while riding. Is this a cause by the rectifier not working properly or is it the stator cauising it. Please let me know, I am do to go on a bike ride thi...

I was running my FZR today and it was idleing, i noticed it would spit fuel out of the #1 carb every once in a while like it was back firing, is this a carb issue or is it timing. I know it needs major carb work as it was sitting for who knows how long before I got it. Also does the air box on make ...

I was wondering if anyone nows why my bike will not sit and idle unless I hold the throttle a little,I have adjusted the idle screw in and out but it seems to ak like its flutuating. Is this a carb issue or is it another issue besides the carbs? I put some seafoam in the tank to see if this helped, ...

Thanks for the help. I'll try that since I thought thats what might have been the cause of it not working.

its off of a 93, its the dual round ones from factory. If this doesn't help what do you mean by different ones? thanks for the help!

Is both sides of the headlight supposed to be lit when on low beem or is it only supposed to be one. Mine only has one lit when in low beem but when I hit it to high both light up. thanks!

I tried that and it still will not let the bike move freely when you pull the lever in and move bike back and forth. I'll retry this and let you know if anything changes. THANKS!

Does anyone have any idea why my clutch is tight and when I pull the lever in my clutch is not disengaging, It acts like its locked in gear and the clutch is frozen. I am in major help with this problem. Thanks!