FZRSupport: the FZROnline Archive

I'm trying to remove my flywheel, I was able to get a bolt thats the right size to fit the threads but it wont pull the flywheel out. Is there a trick to getting it off ?

to lean it is clockwise right ? I'll try it in the morning thanks for the help

no not yet. should i just turn them out 1 turn ? to richen it ? or lean it out ?

ok so i seemed to have fixed the idle problem but it still revs up and hangs the rpms for a while before it drops back to idle. what the hell is wrong with this thing

yeah i had a hell of a time getting them back on

they were taken off recently, i'll check that thanks

the bike wont idle, so heres what its doing. It will start with the choke on and warm up choked but once the choke is let go it will slowly die. With the choke on I can rev it, but it takes a while for it to rev after i turn the throttle. then when i let go of the throttle it will very slowly drop b...

HI ! I have some california carbs which have the two extra tubes on the bottom right hand side. Can these be plugged up or ran open ?

thanks for all the info guys... well its not the battery just got a new one from a friend. i'll check grounds and solenoid when i get some time. thanks

I just recently put the engine back together after blowing a rod as well as replacing the starter "peanut" cover. Well when I hit the switch to start it all i hear is the pistons going up and down very slowly. Could this be a bad battery, ground to the engine, or is something wrong with the starter ...