FZRSupport: the FZROnline Archive

Hi,

I need a measurement from the FZR 1000 or YZF 750 camshafts - the outside diameter of the part where the camshaft sprocket bolts to.



Thanks!

Hi everyone, I represent ABUSO Racing and we are a new company focusing on the production of valvetrain components for various classic bikes. I would just like to share with all FZR owners what we currently offer. We have oversized valves and titanium retainers (coming later for the FZR). All our va...

Thanks

We are only 15 days away...thats good and bad haah

Quick update on our race engine. Just a vicious dyno run up there with the best current liter bikes:

https://www.youtube.com/watch?v=rLa-chQ ... s&index=28

Some more videos with the new race engine: https://www.youtube.com/watch?v=rLa-chQlsJM https://www.youtube.com/watch?v=t8ZbsHPYcYY&list=PLYKgXLH39Wky80xVSBPZFS1YN7AKfiyFs&index=18 https://www.youtube.com/watch?v=SQ77tyWaKSI&list=PLYKgXLH39Wky80xVSBPZFS1YN7AKfiyFs&index=19 https://www.youtube.com/wat...

Tuning results:
https://www.youtube.com/watch?v=rLa-chQlsJM

Not too shabby hey. A 2014 CBR 1000 with exhaust and can puts out 178 on our dyno.

Have you still got any of this?

Thanks

Got it running! Only change from your settings was the sensor polarity (as said above). Wouldn't read rpm signal in minus...had to put it in auto. By the way I have grey wire (Crank sensor) to yellow wire (pin 9 Ignitech). You probably have the other way around. From the manual: "No polarity check-T...

Hi, Just installed the ignitech TCPI4 and having issues with spark - Seems I have none Connection is good and is reading rpm fine. I cannot get any spark. I don't know why. The coils are connected to 12V and the orange and white wire. When I go in the test feature the coils do not spark either. Dwel...

Hi guys, Corey doesn't usually jump start, if you look in the video the bike beside him jerks forward and that triggers his start. We are looking into adjustable ignition systems that will allow a different rev limiter. Now onto the main course...here is the bike (aka flamethrower) on the dyno, righ...

Last video of the weekend, race 3, a dry race. Corey jumped the start but we still got 4th in the end after the penalty.

Here ya go
https://www.youtube.com/watch?v=_zh5liaLqEU

Another one, now in the dry and starting from pit lane...

https://www.youtube.com/watch?v=TPoFnISBC0I

Hi guys,

This is our first video of last weekends race at Phillip Island GP Circuit... This is our new race engine against the likes of S1000RR GSXR1000, CBR1000, RSV4, R1s,.... all liter superbikes

https://www.youtube.com/watch?v=t8ZbsHP ... e=youtu.be

Enjoy, we surely did.
Paulo

Hi, The kit is a 77mm 1040. Its got perfect valve reliefs if running a big cam...Lighter pistons, available in 3 or 2 ring design (for racing) and are forged Wossner. This is our first video of last weekends race at Phillip Island GP Circuit... This is our new race engine against the likes of S1000R...

You should see the flames that it pumps out on deccel... just unreal... We got the 1040 engine done and running it on a race tomorrow at Phillip Island GP Circuit but I will bait you guys some more. A lot of horny pictures.... lol Big valve race head, and RPE 1040 big bore kit (as found on ebay)...n...