FZRSupport: the FZROnline Archive

If I understand your issue properly, you need diodes to the wires going to the instrument cluster

Sent from my LG-H811 using Tapatalk

My personal opinion, instead of spending 2800 on the girly honda, spend that money on the Yamaha. They are great bikes, and last forever! Maybe want to part out that old bike when you're done. I may actually be interested in some parts off the old one as well if you've got em. But I would rather sin...

I'm in Ohio a little out of my reach

Sent from my LG-H811 using Tapatalk

My response may change depending on your location!!

Sent from my LG-H811 using Tapatalk

I wish man!! It's been super busy. I'll give a short update. So I got my fairings in, they need some work for sure. I've decided that I'll be taking her back apart. The paint didn't have the proper hardener in it, and is easy to damage. I'm going to have the frame powder coated. Issue #2: front cowl...

Any news?

Sent from my LG-H811 using Tapatalk

Id say it's probably because your battery was still super drained. It only charges above 3k and with a drained battery, it doesn't have the juice to keep those coils powered like it should. I'd suggest charging your battery and then trying a short ride. Even though it's not necessary, a load test wo...

https://youtu.be/zm5mB3R8Ucw

That's a pretty decent explanation and tutorial on adjustments to the a/f mixture screw. If adjusting doesn't fix it, might be time to jet.

Sent from my LG-H811 using Tapatalk

Well, I've been jumping it with my charger. It has a jump start operation mode. I do have a spare car battery I could try out. That didn't even occur to me that that could be happening. Thanks for the insight. Glad we could discuss it without frying eachother!

Sent from my LG-H811 using Tapatalk

So would you agree to say that it sounds like that vrr maybe wired incorrectly? I get less than 12 vdc when revved at 3k. With vrr unplugged, reading the stator wires, I get around 50ish vac between the three phases 1-2,1-3,2-3. So I know there's juice.

Sent from my LG-H811 using Tapatalk

Already posted this in my old thread but it's a new issue. So.... I looked in the stickies for a how to on checking the vrr for correct ohm readings but didn't see it. Using this photo http://uploads.tapatalk-cdn.com/20160625/49c3dd50d0e77ade8bae46f1bdf2b3fa.jpg I'll explain what I did. Someone corr...

The picture is turned horixontal, turn 90* clockwise for correct pin orientation.

Sent from my LG-H811 using Tapatalk

I looked in the stickies for a how to on checking the vrr for correct ohm readings but didn't see it. Using this photo http://uploads.tapatalk-cdn.com/20160625/49c3dd50d0e77ade8bae46f1bdf2b3fa.jpg I'll explain what I did. Someone correct me if I'm wrong. Both top pins and the bottom right are wires ...

Welp. Looks like my brand new rr is bad. I read all of the wires from the stator and am getting minimum 30 vac at idle and up to 60 between all phases at any rev. As soon as I take the charger cable off, as I have to jump it, the motor dies. And I see less than 12 while it's running and no change wh...

YouTube is your friend. There were a couple videos on there that are very helpful when it comes to adjustments.

Sent from my LG-H811 using Tapatalk