FZRSupport: the FZROnline Archive

looking for a good used unit-yellow label.

S.E. Michigan,'87 vin # JYA2NK002HA000167,currently has a stock 1987 fzr1000 engine with its stock exhaust and a ultrasonic carb cleaning and full viton orings,complete hydraulics rebuild w/new pads+caliper internals, new oem fuel pump,Corbin seat,fork internals-racetech springs,chain-sprockets,body...

update-measured the joint ID as 48mm/ the 1000 joints are 50mm.just ordered the correct joints( less curvature ends in the box) & will see how it goes.

ebay UK has more '87+ fzr's so more parts.this pic is from an 88 1000 & is the same as I have.maybe it just takes some fiddeling to make it sit correctly.thanks for the reply.

maybe the part# 4 spring has failed allowing the lever to drop & engage the trans?

thanks for sorting the headlight issue.now can anyone advise how the air box installs? the 87's used a single throttle cable.since running a 1k engine Yamaha used a duel throttle cable setup.I have cable#2 in the rear slot of the mounting stop.but the airbox from a 1k engine will not seat completely...

ethanol is at 15% here in Michigan; why not switch to viton carb seals to cure all.shipping time is about 2 weeks.http://litetek.co/Carb_Kit_Yamaha_FZR1000_87-88.html

well the windscreens are still being produced by ZeroGravity-same item sold in the UK-shipping costs as much as the part. http://www.nicecycle.com/Yamaha-Windscreen-p/20-505.htm arrived super packaged & clear is still available.as for the hanger-the pic is of the UK fleabay & post is as much as the ...

[attachment=0] no dents,brackets+ fuel valve included ,need fzr750-1000 parts,750 exhaust-stock or kerker,etc.,front brake hose holders,owners manual,plastic.

curious if anyone has tried the fit of these.http://www.dimoonline.de/Yamaha/FZR_750 ... 87_88.html

http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/DNMAAOSw-W5UuS-v/$_57.JPG attaches to the underside of the engine case. obsolete from Yamaha. also seeking a clear windscreen.available & made to order thru UK wemoto but $$$ to ship. http://www.wemoto.com/bikes/yamaha/fzr_1000_genesis__2la/87-88/bodywork/#b...

thanks for taking the time to solve, should have known every manuf. does things different.couple other Q.'s/ the side fairing scoop ducts-where do the outlets attach or do they just point at the engine? and the nose fairing air tubes-where the right side attaches to the frame is the coolant hose-har...

fzr RT 2.jpg fzr RT.jpg for any owners who may have removed/installed their duel headlights,need your input.all the breakers on the bay feature headlights but zero mounting hardware at the 4 corners. http://www.partzilla.com/parts/search/Yamaha/Motorcycle/1987/FZR750RT/FAIRING-COWLING/parts.html Ya...