FZRSupport: the FZROnline Archive

https://www.youtube.com/watch?v=tt9LlqVIDEQ&feature=youtu.be Well she started but don't sound great ,knocking noise is coming from the left side of the bike. Im sure the valve clearances where all at the top end of the range, 15 and 18 for intake with 25 and 28 for the exhaust, I'll try tighenten ex...

It turns freely now the bearing caps are the right way around, thanks bujzzawak.. cant believe I spent so many hours tinkering and it was something so simple.

I dont think the valves should be hiting the pistons since at TDC with the timing marks lined up its cylinder 3 valves wich are pushed down while the piston isnt up and its stuck from then, I dont know much about engines since its first ive had apart. Good call on checking the cap letters, I do I ha...

Haven't measured the cam but used a spare and it had the same problem, didn't use a torque wrench to tightened them but I used around the same as I did with the fzr head I have , as soon as I tightened the caps just enough so there's not a gap between the caps and the head it gets tight.

Hi guys, im having trouble putting my engine back together, once i torque the exhaust cam down I couldnt spin them at all with a spanner, so i took out the valve shims and I can turn it but it is still very stiff, is this from warped journals? If so can i do anything about it other than buying a new...

Hi I think everybody died, we should make babies together and repopulate this place.

I was told sv650 wheel fits with a spacer, anybody tried this?